Package: ANTIBLAZECU and ANTIBLAZECT is available in 250 kg and 60kg drums.

Molecular Structure:

Product description: PRODUCT DESCRIPTION ANTIBLAZECU and ANTIBLAZECT are efficient cyclic phosphonate flame retardant chemicals for textile products. They are non-corrosive with a high phosphorus content, excellent water solubility and may be used to achieve either a non-durable, semi-durable or durable flame retardant finish on a wide range of fabric types. Fabrics treated with ANTIBLAZECU and ANTIBLAZECT are mainly used in furnishing, curtaining, building and automotive applications. They are particularly suitable for the treatment of polyester fabrics to impart a finish that is durable to washing and dry-cleaning. ANTIBLAZECU and ANTIBLAZECT treated fabrics retain a good hand and drape after processing. The finish is non-blooming and can meet the fogging performance required for automotive end-uses. SELLING SPECIFICATION ANTIBLAZECU ANTIBLAZECT Minimum Maximum Minimum Maximum Phosphorus Wt % 20.5 - 19.0 - pH(10% solution) 2.0 3.0 2.0 3.0 Acid Number(mg KOH/g ) - 20.0 - 25.0 Refractive lndex (@25℃) 1.474 1.480 - 1.47 TYPICAL PROPERTIE ANTIBLAZECU ANTIBLAZECT Appearance Clear highly viscous liquid Clear viscous liquid Active Component 100% 93% Density (g/cc@ 25℃) 1.28 1.27 Solubility Water Miscible Miscible Ethanol Miscible Miscible Acetone Miscible Miscible TGA Data Temperature150℃ 2% weight loss 6% 200℃ 4% 8% Viscosity @25℃ (Cps,Brookfield) 20000-50000 7000 TYPICAL APPLICATIONS ANTIBLAZECU and ANTIBLAZECT may be used either alone or in combination with binder systems. Fabrics for treatment with ANTIBLAZECU and ANTIBLAZECT should be clean and absorbent, Starch and other sizes should be removed before processing . Required add-on levels will be determined by the fabric composition, weight and construction as well as the flame retardant performance required and will typically vary from 3% to 12% w/w solids add-on. For topical treatments ANTIBLAZECU and ANTIBLAZECT must be diluted with water to the desired concentration and then may be applied by padding, dipping, spraying or foam techniques. ANTIBLAZECU and ANTIBLAZECT in combination with a binder may be applied by knife over air/roll, lick roll, padding, dipping, spraying or foam techniques. TECHNICAL SERVICE Our Technical Service Department is available to undertake laboratory assessments of customers fabrics for treatment with ANTIBLAZECU and ANTIBLAZECT.