Marathon General Purpose Motors

• Post Date:

  Jul 19,2013

• Expiry Date:

  Jul 19,2014

• Detailed Description:

  "Quick Details:
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:Z421
  Manufacturer:MARATHON
  Enclosure:Dripproof
  Frame:143JP
  Hertz:60
  HP:1.5
  Mounting:C-Face with Rigid Base
  Phase:1
  Voltage:115/208-230
  
  JP Close-Coupled Pump, Single Phase
  Dripproof, C-Face with Rigid Base
  
  Applications:
  Close-coupled pumps where the pump impeller is mounted directly on the motor
  shaft in environments that are relatively clean and dry.
  
  Features:
  NEMA JP pump shaft dimensions
  Ball bearings, mechanically locked on shaft end
  Capacitor start design
  Continuous duty
  1.15 Service Factor
  UL Recognized and CSA Certified
  Quick Details:"
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:
  Manufacturer:
  Enclosure:
  Frame:
  Hertz:
  HP:
  Mounting:
  Phase:
  Voltage:
  
  JP Close-Coupled Pump, Three Phase
  Dripproof, C-Face/Vertical and C-Face with Rigid Base
  
  Applications:
  
  Close-coupled pumps where the pump impeller is mounted directly on the motor
  shaft in environments that are relatively clean and dry.
  
  Features:
  
  NEMA JP pump shaft dimensions
  JPV frame includes drip cover for vertical mount without base
  JP frame has rigid base, drip cover not included
  Ball bearings, mechanically locked on shaft end
  Continuous duty
  1.15 Service Factor
  UL Recognized and CSA Certified
  UL Listed for Fire Pump applications except where footnoted
  "Quick Details:
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:M104
  Manufacturer:MARATHON
  Enclosure:Dripproof
  Frame:143JPV
  Hertz:60
  HP:1.5
  Mounting:C-Face/Vertical and C-Face with Rigid Base
  Phase:3
  Voltage:208-230/460
  
  JP Close-Coupled Pump, Three Phase
  Dripproof, C-Face/Vertical and C-Face with Rigid Base
  
  Applications:
  
  Close-coupled pumps where the pump impeller is mounted directly on the motor
  shaft in environments that are relatively clean and dry.
  
  Features:
  
  NEMA JP pump shaft dimensions
  JPV frame includes drip cover for vertical mount without base
  JP frame has rigid base, drip cover not included
  Ball bearings, mechanically locked on shaft end
  Continuous duty
  1.15 Service Factor
  UL Recognized and CSA Certified
  UL Listed for Fire Pump applications except where footnoted
  Quick Details:"
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:
  Manufacturer:
  Enclosure:
  Frame:
  Hertz:
  HP:
  Mounting:
  Phase:
  Voltage:
  
  Premium Severe Duty/Chemical Processing/IEEE-841,
  Three Phase, NEMA Premium® Efficiency, Blue Chip XRI®
  Totally Enclosed, Rigid Base
  
  Applications:
  
  For extreme applications in the process industries such as chemical plants, pulp and
  paper mills, refineries, above-ground mines, food processing, foundries, and other
  severe duty environments where long life and ultra-high efficiency are required.
  Guaranteed efficiencies offer an eXtra Return on your Investment when using these
  premium efficiency motors on high cycle or long run time applications.
  
  Features:
  
  Meets or exceeds NEMA Premium® efficiencies
  Meets IEEE-841 standard for severe duty applications
  Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration
  Inpro/Seal® VBX® bearing isolators on drive end shaft extension TENV and on
  both ends of TEFC
  Provisions to add stub shaft for an encoder (182T-449T, TEFC only)
  Internal and external epoxy paint
  MAX GUARD® Class F insulation system
  1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power
  Bearing caps (254T and larger)
  Precision balanced
  Extended grease tubes, regreasable in service
  Brass drain and breather
  Meets IEEE45 USCG Marine Duty, API RPI4F for offshore platforms, IP56
  Meets NEMA MG1 - 1.26.6 Waterproof specification
  Division 2 CSA certification nameplate, for hazardous locations, Class I Groups A, B,
  C, and D
  Actual test and vibration data supplied with each motor
  Ball bearings, except where noted
  UL Recognized (through 44
  Available with Nameplate Modification (through 40 HP):
  
  2:1, 20:1, or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power
  1.25 Service Factor through 40 HP (sinewave only)
  50HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only)
  Contact Marathon Electric for optional nameplate markings on 50 HP and larger:
  "Quick Details:
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:K083
  Manufacturer:Marathon
  Enclosure:Dripproof
  Frame:56HZ
  Hertz:60
  HP:1.5
  Mounting:Rigid Base
  Phase:3
  Voltage:575
  
  575 Volt: General Purpose, Three Phase
  Dripproof, Rigid Base
  
  Applications:
  
  General purpose use on compressors, pumps, conveyors, fans, blowers, and other
  machinery in environments that are relatively clean and dry where 575 volt three
  phase power is readily available.
  
  Features:
  
  Ball bearings
  NEMA Service Factors
  UL Recognized and CSA Certified
  Quick Details:"
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:
  Manufacturer:
  Enclosure:
  Frame:
  Hertz:
  HP:
  Mounting:
  Phase:
  Voltage:
  
  Condenser Fan, Three Phase, Open Air Over
  56 Frame, Belly Band/Resilient Mount
  
  Applications:
  
  Commercial condenser fans may be installed outdoors. These motors need to be
  mounted within the airflow of the fan for proper cooling. Used on Trane, Carrier,
  Climtrol and York units, 5 tons and larger.
  
  Features:
  
  Enclosed shaft end bracket, vented frame
  60°C ambient
  Automatic reset thermal protector
  Nameplate 60/50 hertz 190/380 volts,
  at next lower HP
  Double sealed ball bearings
  5/8"" Dia. x 5"" long shaft with flat and
  keyway
  Shaft slinger
  Threaded lead exit
  Patented VCD™ - Voltage Change Device
  4 Locating screws 90 degrees apart,
  3.33"" from outer edge of shaft slinger
  Hubs on both ends will accept resilient
  base kits, see Accessories section (except
  X524 and X526 - horizontal only)
  Ball Bearings
  UL Recognized and CSA Certified
  "Quick Details:
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:M809
  Manufacturer:MARATHON
  Enclosure:Dripproof
  Frame:213HP
  Hertz:60
  HP:10
  Mounting:P-Base
  Phase:3
  Voltage:230/460
  
  Vertical Solid Shaft P-Base
  Dripproof
  
  Applications:
  
  For use on: Vertical end suction, short couple, centrifugal, non-clog, mix flow,
  turbine, and propeller pumps. HP type shafts, per NEMA MG-1 18.625. HPH and TCV
  type shafts, single phase, wound rotor designs, and other modifications such as
  adding screens are also available through special order--contact Marathon Electric for
  more information.
  
  Features:
  
  Normal thrust
  Ball bearings
  Class B insulation
  1.15 Service Factor
  Suitable for 230 volt part winding start through 100 HP
  Heavy duty lifting lugs
  Drip cover/canopy cap included
  UL Recognized and CSA Certified
  Quick Details:"
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:
  Manufacturer:
  Enclosure:
  Frame:
  Hertz:
  HP:
  Mounting:
  Phase:
  Voltage:
  
  Vertical Solid Shaft P-Base
  Dripproof
  
  Applications:
  
  For use on: Vertical end suction, short couple, centrifugal, non-clog, mix flow,
  turbine, and propeller pumps. HP type shafts, per NEMA MG-1 18.625. HPH and TCV
  type shafts, single phase, wound rotor designs, and other modifications such as
  adding screens are also available through special order--contact Marathon Electric for
  more information.
  
  Features:
  
  Normal thrust
  Ball bearings
  Class B insulation
  1.15 Service Factor
  Suitable for 230 volt part winding start through 100 HP
  Heavy duty lifting lugs
  Drip cover/canopy cap included
  UL Recognized and CSA Certified
  "Quick Details:
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:M887
  Manufacturer:MARATHON
  Enclosure:Totally Enclosed
  Frame:284HP
  Hertz:60
  HP:10
  Mounting:P-Base
  Phase:3
  Voltage:230/460
  
  Vertical Solid Shaft P-Base
  Totally Enclosed
  
  Applications:
  
  For use on: Vertical end suction, short couple, centrifugal, non-clog, mix flow,
  turbine, and propeller pumps. Totally Enclosed, Fan Cooled construction restricts the
  free exchange of ambient air inside the motor. Suitable for demanding applications in
  the process industries. HP type shafts, per NEMA MG-1, 18.625. HPH type shafts,
  severe duty features, explosion proof, and other modifications such as adding screens
  are also available through special order--contact Marathon Electric for more
  information.
  
  Features:
  
  Normal thrust
  Class F insulation
  1.15 Service Factor
  Suitable for 230 volt part winding start through 100 HP
  Heavy duty lifting lugs
  Drip cover/canopy cap included
  UL Recognized and CSA Certified
  Quick Details:"
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:
  Manufacturer:
  Enclosure:
  Frame:
  Hertz:
  HP:
  Mounting:
  Phase:
  Voltage:
  
  Vertical Solid Shaft P-Base
  Totally Enclosed
  
  Applications:
  
  For use on: Vertical end suction, short couple, centrifugal, non-clog, mix flow,
  turbine, and propeller pumps. Totally Enclosed, Fan Cooled construction restricts the
  free exchange of ambient air inside the motor. Suitable for demanding applications in
  the process industries. HP type shafts, per NEMA MG-1, 18.625. HPH type shafts,
  severe duty features, explosion proof, and other modifications such as adding screens
  are also available through special order--contact Marathon Electric for more
  information.
  
  Features:
  
  Normal thrust
  Class F insulation
  1.15 Service Factor
  Suitable for 230 volt part winding start through 100 HP
  Heavy duty lifting lugs
  Drip cover/canopy cap included
  UL Recognized and CSA Certified
  "Quick Details:
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:E581
  Manufacturer:Marathon
  Enclosure:Explosion Proof
  Frame:444TS
  Hertz:60
  HP:125
  Mounting:Rigid Base
  Phase:3
  Voltage:460
  
  Explosion Proof, Three Phase
  Blue Chip XRI® NEMA Premium® Severe Duty
  Class I Group C & D, Class II Groups F & G, Rigid Base
  
  Applications:
  
  For use on fans, blowers, pumps, compressors, machine tools, and other equipment
  installed in hazardous environments as defined by the motor’s explosion proof class and
  group rating. Consult the National Electrical Code and your local regulations for the
  proper selection of motors in hazardous conditions.
  
  Features: Meets NEMA Premium® efficiencies
  
  10:1 Variable torque, see Inverter Duty column for constant torque
  MAX GUARD® Class F insulation
  1.15 Service Factor on sinewave or 1.0 Service Factor on IBGT power
  Normally closed thermostats (must be connected to control circuit)
  Meets UL frame temperature limit code T3B
  All cast iron construction
  Shaft slinger
  Internal and external surfaces treated with epoxy paint
  Extended grease tubes
  Nameplated 60/50 Hz, 190/380 Volts, at next lower HP where
  Quick Details:"
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:
  Manufacturer:
  Enclosure:
  Frame:
  Hertz:
  HP:
  Mounting:
  Phase:
  Voltage:
  
  Vertical Solid Shaft P-Base
  Totally Enclosed
  
  Applications:
  
  For use on: Vertical end suction, short couple, centrifugal, non-clog, mix flow,
  turbine, and propeller pumps. Totally Enclosed, Fan Cooled construction restricts the
  free exchange of ambient air inside the motor. Suitable for demanding applications in
  the process industries. HP type shafts, per NEMA MG-1, 18.625. HPH type shafts,
  severe duty features, explosion proof, and other modifications such as adding screens
  are also available through special order--contact Marathon Electric for more
  information.
  
  Features:
  
  Normal thrust
  Class F insulation
  1.15 Service Factor
  Suitable for 230 volt part winding start through 100 HP
  Heavy duty lifting lugs
  Drip cover/canopy cap included
  UL Recognized and CSA Certified
  "Quick Details:
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:M889
  Manufacturer:MARATHON
  Enclosure:Totally Enclosed
  Frame:254HP
  Hertz:60
  HP:15
  Mounting:P-Base
  Phase:3
  Voltage:230/460
  
  Vertical Solid Shaft P-Base
  Totally Enclosed
  
  Applications:
  
  For use on: Vertical end suction, short couple, centrifugal, non-clog, mix flow,
  turbine, and propeller pumps. Totally Enclosed, Fan Cooled construction restricts the
  free exchange of ambient air inside the motor. Suitable for demanding applications in
  the process industries. HP type shafts, per NEMA MG-1, 18.625. HPH type shafts,
  severe duty features, explosion proof, and other modifications such as adding screens
  are also available through special order--contact Marathon Electric for more
  information.
  
  Features:
  
  Normal thrust
  Class F insulation
  1.15 Service Factor
  Suitable for 230 volt part winding start through 100 HP
  Heavy duty lifting lugs
  Drip cover/canopy cap included
  UL Recognized and CSA Certified
  Quick Details:"
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:
  Manufacturer:
  Enclosure:
  Frame:
  Hertz:
  HP:
  Mounting:
  Phase:
  Voltage:
  
  Vertical Solid Shaft P-Base
  Totally Enclosed
  
  Applications:
  
  For use on: Vertical end suction, short couple, centrifugal, non-clog, mix flow,
  turbine, and propeller pumps. Totally Enclosed, Fan Cooled construction restricts the
  free exchange of ambient air inside the motor. Suitable for demanding applications in
  the process industries. HP type shafts, per NEMA MG-1, 18.625. HPH type shafts,
  severe duty features, explosion proof, and other modifications such as adding screens
  are also available through special order--contact Marathon Electric for more
  information.
  
  Features:
  
  Normal thrust
  Class F insulation
  1.15 Service Factor
  Suitable for 230 volt part winding start through 100 HP
  Heavy duty lifting lugs
  Drip cover/canopy cap included
  UL Recognized and CSA Certified
  "Quick Details:
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:E189
  Manufacturer:Marathon
  Enclosure:Dripproof
  Frame:254JMV
  Hertz:60
  HP:15
  Mounting:C-Face with Rigid Base
  Phase:3
  Voltage:575
  
  575 Volt: JM Close-Coupled Pump, Three Phase
  Dripproof, C-Face and C-Face with Rigid Base
  
  Applications:
  
  Close-coupled pumps where the pump impeller is mounted directly on the motor
  shaft in environments that are relatively clean and dry. For use outdoors an
  enclosure or drip cover may be required (see Accessories section).
  
  Features:
  
  NEMA JM pump shaft dimensions
  JMV frame includes drip cover for vertical mount without base
  JM frame has rigid base, drip cover not included
  Ball bearings, mechanically locked on shaft end
  Continuous duty
  1.15 Service Factor
  UL Recognized and CSA Certified
  UL Listed for Fire Pump applications
  Quick Details:"
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:
  Manufacturer:
  Enclosure:
  Frame:
  Hertz:
  HP:
  Mounting:
  Phase:
  Voltage:
  
  575 Volt: Premium Severe Duty/Chemical Processing/IEEE-841,
  Three Phase, NEMA Premium® Efficiency, Blue Chip XRI®
  Totally Enclosed, Rigid Base
  
  Applications:
  
  For extreme applications in the process industries such as chemical plants, paper mills,
  refineries, mines, food processing, foundries, and other severe duty environments where
  long life and ultra-high efficiency are desired. Guaranteed efficiencies offer an eXtra
  Return on your Investment when using these premium efficiency motors on high cycle
  or long run time applications.
  
  Features:
  
  Meets or exceeds NEMA Premium® efficiencies, except where noted
  Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration
  Provisions to add stub shaft for an encoder
  Internal and external epoxy paint
  MAX GUARD® Class F insulation system
  1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT Power
  Extended grease tubes, regreasable in service
  Brass drain and breather
  Meets IEEE45, USCG Marine Duty, IP54 Construction
  Meets Ford EMS Automotive Specification
  Division 2 CSA certification nameplate, for hazardous locations, Class 1 Groups A, B, C,
  and D
  Actual test and vibration data supplied with each motor
  Ball bearings, except where noted
  UL Recognized (through 449T), CSA Certified
  Three year warranty
  Available with Nameplate Modification (through 40 HP):
  
  2:1, 20:1, or 1000:1 Constant Torque,1.0 Service Factor on IGBT (PWM) power
  1.25 Service Factor through 40 HP (sinewave only)
  50 HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only)
  Contact Marathon Electric for optional nameplate markings on 50 HP and larger
  "Quick Details:
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:E586
  Manufacturer:Marathon
  Enclosure:Explosion Proof
  Frame:445T
  Hertz:60
  HP:150
  Mounting:Rigid Base
  Phase:3
  Voltage:460
  
  Explosion Proof, Three Phase
  Blue Chip XRI® NEMA Premium® Severe Duty
  Class I Group C & D, Class II Groups F & G, Rigid Base
  
  Applications:
  
  For use on fans, blowers, pumps, compressors, machine tools, and other equipment
  installed in hazardous environments as defined by the motor’s explosion proof class and
  group rating. Consult the National Electrical Code and your local regulations for the
  proper selection of motors in hazardous conditions.
  
  Features: Meets NEMA Premium® efficiencies
  
  10:1 Variable torque, see Inverter Duty column for constant torque
  MAX GUARD® Class F insulation
  1.15 Service Factor on sinewave or 1.0 Service Factor on IBGT power
  Normally closed thermostats (must be connected to control circuit)
  Meets UL frame temperature limit code T3B
  All cast iron construction
  Shaft slinger
  Internal and external surfaces treated with epoxy paint
  Extended grease tubes
  Nameplated 60/50 Hz, 190/380 Volts, at next lower HP
  Quick Details:"
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:
  Manufacturer:
  Enclosure:
  Frame:
  Hertz:
  HP:
  Mounting:
  Phase:
  Voltage:
  
  Explosion Proof, Three Phase
  Blue Chip XRI® NEMA Premium® Severe Duty
  Class I Group C & D, Class II Groups F & G, Rigid Base
  
  Applications:
  
  For use on fans, blowers, pumps, compressors, machine tools, and other equipment
  installed in hazardous environments as defined by the motor’s explosion proof class and
  group rating. Consult the National Electrical Code and your local regulations for the
  proper selection of motors in hazardous conditions.
  
  Features: Meets NEMA Premium® efficiencies
  
  10:1 Variable torque, see Inverter Duty column for constant torque
  MAX GUARD® Class F insulation
  1.15 Service Factor on sinewave or 1.0 Service Factor on IBGT power
  Normally closed thermostats (must be connected to control circuit)
  Meets UL frame temperature limit code T3B
  All cast iron construction
  Shaft slinger
  Internal and external surfaces treated with epoxy paint
  Extended grease tubes
  Nameplated 60/50 Hz, 190/380 Volts, at next lower HP where
  "Quick Details:
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:Z423
  Manufacturer:MARATHON
  Enclosure:Dripproof
  Frame:145JP
  Hertz:60
  HP:2
  Mounting:C-Face with Rigid Base
  Phase:1
  Voltage:115/208-230
  
  JP Close-Coupled Pump, Single Phase
  Dripproof, C-Face with Rigid Base
  
  Applications:
  
  Close-coupled pumps where the pump impeller is mounted directly on the motor
  shaft in environments that are relatively clean and dry.
  
  Features:
  
  NEMA JP pump shaft dimensions
  Ball bearings, mechanically locked on shaft end
  Capacitor start design
  Continuous duty
  1.15 Service Factor
  UL Recognized and CSA Certified
  Quick Details:"
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:
  Manufacturer:
  Enclosure:
  Frame:
  Hertz:
  HP:
  Mounting:
  Phase:
  Voltage:
  
  JP Close-Coupled Pump, Three Phase
  Dripproof, C-Face/Vertical and C-Face with Rigid Base
  
  Applications:
  
  Close-coupled pumps where the pump impeller is mounted directly on the motor
  shaft in environments that are relatively clean and dry.
  
  Features:
  
  NEMA JP pump shaft dimensions
  JPV frame includes drip cover for vertical mount without base
  JP frame has rigid base, drip cover not included
  Ball bearings, mechanically locked on shaft end
  Continuous duty
  1.15 Service Factor
  UL Recognized and CSA Certified
  UL Listed for Fire Pump applications except where footnoted
  "Quick Details:
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:W516
  Manufacturer:Marathon
  Enclosure:Totally Enclosed
  Frame:213T
  Hertz:60
  HP:2
  Mounting:Rigid Base
  Phase:3
  Voltage:460
  
  Premium Severe Duty/Chemical Processing/IEEE-841,
  Three Phase, NEMA Premium® Efficiency, Blue Chip XRI®
  Totally Enclosed, Rigid Base
  
  Applications:
  
  For extreme applications in the process industries such as chemical plants, pulp and
  paper mills, refineries, above-ground mines, food processing, foundries, and other
  severe duty environments where long life and ultra-high efficiency are required.
  Guaranteed efficiencies offer an eXtra Return on your Investment when using these
  premium efficiency motors on high cycle or long run time applications.
  
  Features:
  
  Meets or exceeds NEMA Premium® efficiencies
  Meets IEEE-841 standard for severe duty applications
  Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration
  Inpro/Seal® VBX® bearing isolators on drive end shaft extension TENV and on
  both ends of TEFC
  Provisions to add stub shaft for an encoder (182T-449T, TEFC only)
  Internal and external epoxy paint
  MAX GUARD® Class F insulation system
  1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power
  Bearing caps (254T and larger)
  Precision balanced
  Extended grease tubes, regreasable in service
  Brass drain and breather
  Meets IEEE45 USCG Marine Duty, API RPI4F for offshore platforms, IP56
  Meets NEMA MG1 - 1.26.6 Waterproof specification
  Division 2 CSA certification nameplate, for hazardous locations, Class I Groups A, B,
  C, and D
  Actual test and vibration data supplied with each motor
  Ball bearings, except where noted
  UL Recognized (through 44
  Available with Nameplate Modification (through 40 HP):
  
  2:1, 20:1, or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power
  1.25 Service Factor through 40 HP (sinewave only)
  50HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only)
  Contact Marathon Electric for optional nameplate markings on 50 HP and larger:
  Quick Details:"
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:
  Manufacturer:
  Enclosure:
  Frame:
  Hertz:
  HP:
  Mounting:
  Phase:
  Voltage:
  
  575 Volt: General Purpose, Three Phase
  Dripproof, Rigid Base
  
  Applications:
  
  General purpose use on compressors, pumps, conveyors, fans, blowers, and other
  machinery in environments that are relatively clean and dry where 575 volt three
  phase power is readily available.
  
  Features:
  
  Ball bearings
  NEMA Service Factors
  UL Recognized and CSA Certified
  "Quick Details:
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:M169
  Manufacturer:MARATHON
  Enclosure:Dripproof
  Frame:254JPV
  Hertz:60
  HP:20
  Mounting:C-Face/Vertical and C-Face with Rigid Base
  Phase:3
  Voltage:208-230/460
  
  JP Close-Coupled Pump, Three Phase
  Dripproof, C-Face/Vertical and C-Face with Rigid Base
  
  Applications:
  
  Close-coupled pumps where the pump impeller is mounted directly on the motor
  shaft in environments that are relatively clean and dry.
  
  Features:
  
  NEMA JP pump shaft dimensions
  JPV frame includes drip cover for vertical mount without base
  JP frame has rigid base, drip cover not included
  Ball bearings, mechanically locked on shaft end
  Continuous duty
  1.15 Service Factor
  UL Recognized and CSA Certified
  UL Listed for Fire Pump applications except where footnoted
  Quick Details:"
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:
  Manufacturer:
  Enclosure:
  Frame:
  Hertz:
  HP:
  Mounting:
  Phase:
  Voltage:
  
  Explosion Proof, Three Phase
  Blue Chip XRI® NEMA Premium® Severe Duty
  Class I Group C & D, Class II Groups F & G, Rigid Base
  
  Applications:
  
  For use on fans, blowers, pumps, compressors, machine tools, and other equipment
  installed in hazardous environments as defined by the motor’s explosion proof class and
  group rating. Consult the National Electrical Code and your local regulations for the
  proper selection of motors in hazardous conditions.
  
  Features: Meets NEMA Premium® efficiencies
  
  10:1 Variable torque, see Inverter Duty column for constant torque
  MAX GUARD® Class F insulation
  1.15 Service Factor on sinewave or 1.0 Service Factor on IBGT power
  Normally closed thermostats (must be connected to control circuit)
  Meets UL frame temperature limit code T3B
  All cast iron construction
  Shaft slinger
  Internal and external surfaces treated with epoxy paint
  Extended grease tubes
  Nameplated 60/50 Hz, 190/380 Volts, at next lower HP where
  "Quick Details:
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:U222
  Manufacturer:MARATHON
  Enclosure:Dripproof
  Frame:256JPV
  Hertz:60
  HP:20
  Mounting:C-Face/Vertical and C-Face with Rigid Base
  Phase:3
  Voltage:230/460
  
  JP Close-Coupled Pump, Three Phase
  Dripproof, C-Face/Vertical and C-Face with Rigid Base
  
  Applications:
  
  Close-coupled pumps where the pump impeller is mounted directly on the motor
  shaft in environments that are relatively clean and dry.
  
  Features:
  
  NEMA JP pump shaft dimensions
  JPV frame includes drip cover for vertical mount without base
  JP frame has rigid base, drip cover not included
  Ball bearings, mechanically locked on shaft end
  Continuous duty
  1.15 Service Factor
  UL Recognized and CSA Certified
  UL Listed for Fire Pump applications except where footnoted
  Quick Details:"
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:
  Manufacturer:
  Enclosure:
  Frame:
  Hertz:
  HP:
  Mounting:
  Phase:
  Voltage:
  
  Vertical Solid Shaft P-Base
  Dripproof
  
  Applications:
  
  For use on: Vertical end suction, short couple, centrifugal, non-clog, mix flow,
  turbine, and propeller pumps. HP type shafts, per NEMA MG-1 18.625. HPH and TCV
  type shafts, single phase, wound rotor designs, and other modifications such as
  adding screens are also available through special order--contact Marathon Electric for
  more information.
  
  Features:
  
  Normal thrust
  Ball bearings
  Class B insulation
  1.15 Service Factor
  Suitable for 230 volt part winding start through 100 HP
  Heavy duty lifting lugs
  Drip cover/canopy cap included
  UL Recognized and CSA Certified
  "Quick Details:
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:M895
  Manufacturer:MARATHON
  Enclosure:Totally Enclosed
  Frame:324HP
  Hertz:60
  HP:20
  Mounting:P-Base
  Phase:3
  Voltage:230/460
  
  Vertical Solid Shaft P-Base
  Totally Enclosed
  
  Applications:
  
  For use on: Vertical end suction, short couple, centrifugal, non-clog, mix flow,
  turbine, and propeller pumps. Totally Enclosed, Fan Cooled construction restricts the
  free exchange of ambient air inside the motor. Suitable for demanding applications in
  the process industries. HP type shafts, per NEMA MG-1, 18.625. HPH type shafts,
  severe duty features, explosion proof, and other modifications such as adding screens
  are also available through special order--contact Marathon Electric for more
  information.
  
  Features:
  
  Normal thrust
  Class F insulation
  1.15 Service Factor
  Suitable for 230 volt part winding start through 100 HP
  Heavy duty lifting lugs
  Drip cover/canopy cap included
  UL Recognized and CSA Certified
  Quick Details:"
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:
  Manufacturer:
  Enclosure:
  Frame:
  Hertz:
  HP:
  Mounting:
  Phase:
  Voltage:
  
  Premium Severe Duty/Chemical Processing/IEEE-841,
  Three Phase, NEMA Premium® Efficiency, Blue Chip XRI®
  Totally Enclosed, Rigid Base
  
  Applications:
  
  For extreme applications in the process industries such as chemical plants, pulp and
  paper mills, refineries, above-ground mines, food processing, foundries, and other
  severe duty environments where long life and ultra-high efficiency are required.
  Guaranteed efficiencies offer an eXtra Return on your Investment when using these
  premium efficiency motors on high cycle or long run time applications.
  
  Features:
  
  Meets or exceeds NEMA Premium® efficiencies
  Meets IEEE-841 standard for severe duty applications
  Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration
  Inpro/Seal® VBX® bearing isolators on drive end shaft extension TENV and on
  both ends of TEFC
  Provisions to add stub shaft for an encoder (182T-449T, TEFC only)
  Internal and external epoxy paint
  MAX GUARD® Class F insulation system
  1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power
  Bearing caps (254T and larger)
  Precision balanced
  Extended grease tubes, regreasable in service
  Brass drain and breather
  Meets IEEE45 USCG Marine Duty, API RPI4F for offshore platforms, IP56
  Meets NEMA MG1 - 1.26.6 Waterproof specification
  Division 2 CSA certification nameplate, for hazardous locations, Class I Groups A, B,
  C, and D
  Actual test and vibration data supplied with each motor
  Ball bearings, except where noted
  UL Recognized (through 44
  Available with Nameplate Modification (through 40 HP):
  
  2:1, 20:1, or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power
  1.25 Service Factor through 40 HP (sinewave only)
  50HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only)
  Contact Marathon Electric for optional nameplate markings on 50 HP and larger
  "Quick Details:
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:W552
  Manufacturer:Marathon
  Enclosure:Totally Enclosed
  Frame:256T
  Hertz:60
  HP:20
  Mounting:Rigid Base
  Phase:3
  Voltage:575
  
  Premium Severe Duty/Chemical Processing/IEEE-841,
  Three Phase, NEMA Premium® Efficiency, Blue Chip XRI®
  Totally Enclosed, Rigid Base
  
  Applications:
  
  For extreme applications in the process industries such as chemical plants, pulp and
  paper mills, refineries, above-ground mines, food processing, foundries, and other
  severe duty environments where long life and ultra-high efficiency are required.
  Guaranteed efficiencies offer an eXtra Return on your Investment when using these
  premium efficiency motors on high cycle or long run time applications.
  
  Features:
  
  Meets or exceeds NEMA Premium® efficiencies
  Meets IEEE-841 standard for severe duty applications
  Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration
  Inpro/Seal® VBX® bearing isolators on drive end shaft extension TENV and on
  both ends of TEFC
  Provisions to add stub shaft for an encoder (182T-449T, TEFC only)
  Internal and external epoxy paint
  MAX GUARD® Class F insulation system
  1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power
  Bearing caps (254T and larger)
  Precision balanced
  Extended grease tubes, regreasable in service
  Brass drain and breather
  Meets IEEE45 USCG Marine Duty, API RPI4F for offshore platforms, IP56
  Meets NEMA MG1 - 1.26.6 Waterproof specification
  Division 2 CSA certification nameplate, for hazardous locations, Class I Groups A, B,
  C, and D
  Actual test and vibration data supplied with each motor
  Ball bearings, except where noted
  UL Recognized (through 44
  Available with Nameplate Modification (through 40 HP):
  
  2:1, 20:1, or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power
  1.25 Service Factor through 40 HP (sinewave only)
  50HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only)
  Contact Marathon Electric for optional nameplate markings on 50 HP and larger
  Quick Details:"
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:
  Manufacturer:
  Enclosure:
  Frame:
  Hertz:
  HP:
  Mounting:
  Phase:
  Blue Chip® quality, cast iron construction for rigidity
  and reduced vibration
  Open Conrad radial ball bearings rated at
  100,000 hour B-10 life on direct coupled-loads
  except where footnoted
  Grease fittings with extended grease tubes
  Oversized cast iron conduit box
  Epoxy, 100% solids, Vacuum Pressure Impregnation
  (VPI) resin
  1.15 Service Factor (except where footnoted)
  Front and rear cast iron bearing caps
  Provisions for jacking bolts in all four feet
  Actual test and vibration data included with each motor.
  Class F insulation. Form wound coils
  Internal and external epoxy finish
  Rotating shaft seals, Inpro® Smart Rings on each end
  Provisions for dowel pins in drive end feet
  Ground provisions on foot and in the conduit box
  Frames drilled with four sets of footholes, 5009,
  5010, 5011 and 5012 as standard except where
  footnoted
  Division 2 CSA certified for Class 1, Group A, B, C, D,
  temperature Code T2C @ 1.0 Service Factor
  Division 2 CSA certified for Class 1, Group A, B, C, D,
  temperature Code T2B @ 1.15 Service Factor
  IEEE-841 features available contact customer service
  for details
  "Quick Details:
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:E589
  Manufacturer:Marathon
  Enclosure:Explosion Proof
  Frame:449T
  Hertz:60
  HP:200
  Mounting:Rigid Base
  Phase:3
  Voltage:460
  
  Explosion Proof, Three Phase
  Blue Chip XRI® NEMA Premium® Severe Duty
  Class I Group C & D, Class II Groups F & G, Rigid Base
  
  Applications:
  
  For use on fans, blowers, pumps, compressors, machine tools, and other equipment
  installed in hazardous environments as defined by the motor’s explosion proof class and
  group rating. Consult the National Electrical Code and your local regulations for the
  proper selection of motors in hazardous conditions.
  
  Features: Meets NEMA Premium® efficiencies
  
  10:1 Variable torque, see Inverter Duty column for constant torque
  MAX GUARD® Class F insulation
  1.15 Service Factor on sinewave or 1.0 Service Factor on IBGT power
  Normally closed thermostats (must be connected to control circuit)
  Meets UL frame temperature limit code T3B
  All cast iron construction
  Shaft slinger
  Internal and external surfaces treated with epoxy paint
  Extended grease tubes
  Nameplated 60/50 Hz, 190/380 Volts, at next lower HP where
  Quick Details:"
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:
  Manufacturer:
  Enclosure:
  Frame:
  Hertz:
  HP:
  Mounting:
  Phase:
  Voltage:
  
  Premium Severe Duty/Chemical Processing/IEEE-841,
  Three Phase, NEMA Premium® Efficiency, Blue Chip XRI®
  Totally Enclosed, Rigid Base
  
  Applications:
  
  For extreme applications in the process industries such as chemical plants, pulp and
  paper mills, refineries, above-ground mines, food processing, foundries, and other
  severe duty environments where long life and ultra-high efficiency are required.
  Guaranteed efficiencies offer an eXtra Return on your Investment when using these
  premium efficiency motors on high cycle or long run time applications.
  
  Features:
  
  Meets or exceeds NEMA Premium® efficiencies
  Meets IEEE-841 standard for severe duty applications
  Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration
  Inpro/Seal® VBX® bearing isolators on drive end shaft extension TENV and on
  both ends of TEFC
  Provisions to add stub shaft for an encoder (182T-449T, TEFC only)
  Internal and external epoxy paint
  MAX GUARD® Class F insulation system
  1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power
  Bearing caps (254T and larger)
  Precision balanced
  Extended grease tubes, regreasable in service
  Brass drain and breather
  Meets IEEE45 USCG Marine Duty, API RPI4F for offshore platforms, IP56
  Meets NEMA MG1 - 1.26.6 Waterproof specification
  Division 2 CSA certification nameplate, for hazardous locations, Class I Groups A, B,
  C, and D
  Actual test and vibration data supplied with each motor
  Ball bearings, except where noted
  UL Recognized (through 44
  Available with Nameplate Modification (through 40 HP):
  
  2:1, 20:1, or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power
  1.25 Service Factor through 40 HP (sinewave only)
  50HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only)
  Contact Marathon Electric for optional nameplate markings on 50 HP and larger
  "Quick Details:
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:E587
  Manufacturer:Marathon
  Enclosure:Explosion Proof
  Frame:445TS
  Hertz:60
  HP:200
  Mounting:Rigid Base
  Phase:3
  Voltage:460
  
  Explosion Proof, Three Phase
  Blue Chip XRI® NEMA Premium® Severe Duty
  Class I Group C & D, Class II Groups F & G, Rigid Base
  
  Applications:
  
  For use on fans, blowers, pumps, compressors, machine tools, and other equipment
  installed in hazardous environments as defined by the motor’s explosion proof class and
  group rating. Consult the National Electrical Code and your local regulations for the
  proper selection of motors in hazardous conditions.
  
  Features: Meets NEMA Premium® efficiencies
  
  10:1 Variable torque, see Inverter Duty column for constant torque
  MAX GUARD® Class F insulation
  1.15 Service Factor on sinewave or 1.0 Service Factor on IBGT power
  Normally closed thermostats (must be connected to control circuit)
  Meets UL frame temperature limit code T3B
  All cast iron construction
  Shaft slinger
  Internal and external surfaces treated with epoxy paint
  Extended grease tubes
  Nameplated 60/50 Hz, 190/380 Volts, at next lower HP where
  Quick Details:"
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:
  Manufacturer:
  Enclosure:
  Frame:
  Hertz:
  HP:
  Mounting:
  Phase:
  Voltage:
  
  Explosion Proof, Three Phase
  Blue Chip XRI® NEMA Premium® Severe Duty
  Class I Group C & D, Class II Groups F & G, Rigid Base
  
  Applications:
  
  For use on fans, blowers, pumps, compressors, machine tools, and other equipment
  installed in hazardous environments as defined by the motor’s explosion proof class and
  group rating. Consult the National Electrical Code and your local regulations for the
  proper selection of motors in hazardous conditions.
  
  Features: Meets NEMA Premium® efficiencies
  
  10:1 Variable torque, see Inverter Duty column for constant torque
  MAX GUARD® Class F insulation
  1.15 Service Factor on sinewave or 1.0 Service Factor on IBGT power
  Normally closed thermostats (must be connected to control circuit)
  Meets UL frame temperature limit code T3B
  All cast iron construction
  Shaft slinger
  Internal and external surfaces treated with epoxy paint
  Extended grease tubes
  Nameplated 60/50 Hz, 190/380 Volts, at next lower HP
  "Quick Details:
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:W564
  Manufacturer:Marathon
  Enclosure:Totally Enclosed
  Frame:326T
  Hertz:60
  HP:25
  Mounting:Rigid Base
  Phase:3
  Voltage:460
  
  Premium Severe Duty/Chemical Processing/IEEE-841,
  Three Phase, NEMA Premium® Efficiency, Blue Chip XRI®
  Totally Enclosed, Rigid Base
  
  Applications:
  
  For extreme applications in the process industries such as chemical plants, pulp and
  paper mills, refineries, above-ground mines, food processing, foundries, and other
  severe duty environments where long life and ultra-high efficiency are required.
  Guaranteed efficiencies offer an eXtra Return on your Investment when using these
  premium efficiency motors on high cycle or long run time applications.
  
  Features:
  
  Meets or exceeds NEMA Premium® efficiencies
  Meets IEEE-841 standard for severe duty applications
  Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration
  Inpro/Seal® VBX® bearing isolators on drive end shaft extension TENV and on
  both ends of TEFC
  Provisions to add stub shaft for an encoder (182T-449T, TEFC only)
  Internal and external epoxy paint
  MAX GUARD® Class F insulation system
  1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power
  Bearing caps (254T and larger)
  Precision balanced
  Extended grease tubes, regreasable in service
  Brass drain and breather
  Meets IEEE45 USCG Marine Duty, API RPI4F for offshore platforms, IP56
  Meets NEMA MG1 - 1.26.6 Waterproof specification
  Division 2 CSA certification nameplate, for hazardous locations, Class I Groups A, B,
  C, and D
  Actual test and vibration data supplied with each motor
  Ball bearings, except where noted
  UL Recognized (through 44
  Available with Nameplate Modification (through 40 HP):
  
  2:1, 20:1, or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power
  1.25 Service Factor through 40 HP (sinewave only)
  50HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only)
  Contact Marathon Electric for optional nameplate markings on 50 HP and larger
  Quick Details:"
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:
  Manufacturer:
  Enclosure:
  Frame:
  Hertz:
  HP:
  Mounting:
  Phase:
  Voltage:
  
  Premium Severe Duty/Chemical Processing/IEEE-841,
  Three Phase, NEMA Premium® Efficiency, Blue Chip XRI®
  Totally Enclosed, Rigid Base
  
  Applications:
  
  For extreme applications in the process industries such as chemical plants, pulp and
  paper mills, refineries, above-ground mines, food processing, foundries, and other
  severe duty environments where long life and ultra-high efficiency are required.
  Guaranteed efficiencies offer an eXtra Return on your Investment when using these
  premium efficiency motors on high cycle or long run time applications.
  
  Features:
  
  Meets or exceeds NEMA Premium® efficiencies
  Meets IEEE-841 standard for severe duty applications
  Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration
  Inpro/Seal® VBX® bearing isolators on drive end shaft extension TENV and on
  both ends of TEFC
  Provisions to add stub shaft for an encoder (182T-449T, TEFC only)
  Internal and external epoxy paint
  MAX GUARD® Class F insulation system
  1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power
  Bearing caps (254T and larger)
  Precision balanced
  Extended grease tubes, regreasable in service
  Brass drain and breather
  Meets IEEE45 USCG Marine Duty, API RPI4F for offshore platforms, IP56
  Meets NEMA MG1 - 1.26.6 Waterproof specification
  Division 2 CSA certification nameplate, for hazardous locations, Class I Groups A, B,
  C, and D
  Actual test and vibration data supplied with each motor
  Ball bearings, except where noted
  UL Recognized (through 44
  Available with Nameplate Modification (through 40 HP):
  
  2:1, 20:1, or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power
  1.25 Service Factor through 40 HP (sinewave only)
  50HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only)
  Contact Marathon Electric for optional nameplate markings on 50 HP and larger
  "Quick Details:
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:Y258
  Manufacturer:MARATHON
  Enclosure:Totally Enclosed
  Frame:5011S
  Hertz:60
  HP:250
  Mounting:Rigid Base
  Phase:3
  
  Applications:
  For extreme applications in the process industries such as chemical plants,
  pulp and paper mills,food processing,foundries,and other severe duty
  nvironments where medium voltage power is available.
  
  
  Features:
  Blue Chip® quality, cast iron construction for rigidity
  and reduced vibration
  Open Conrad radial ball bearings rated at
  100,000 hour B-10 life on direct coupled-loads
  except where footnoted
  Grease fittings with extended grease tubes
  Oversized cast iron conduit box
  Epoxy, 100% solids, Vacuum Pressure Impregnation
  (VPI) resin
  1.15 Service Factor (except where footnoted)
  Front and rear cast iron bearing caps
  Provisions for jacking bolts in all four feet
  Actual test and vibration data included with each motor
  Class F insulation. Form wound coils
  Internal and external epoxy finish
  Rotating shaft seals, Inpro® Smart Rings on each end
  Provisions for dowel pins in drive end feet
  Ground provisions on foot and in the conduit box
  Frames drilled with four sets of footholes, 5009,
  5010, 5011 and 5012 as standard except where
  footnoted
  Division 2 CSA certified for Class 1, Group A, B, C, D,
  temperature Code T2C @ 1.0 Service Factor
  Division 2 CSA certified for Class 1, Group A, B, C, D,
  temperature Code T2B @ 1.15 Service Factor
  IEEE-841 features available contact customer service
  for details
  Quick Details:"
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:
  Manufacturer:
  Enclosure:
  Frame:
  Hertz:
  HP:
  Mounting:
  Phase:
  
  Features:
  Blue Chip® quality, cast iron construction for rigidity
  and reduced vibration
  Open Conrad radial ball bearings rated at
  100,000 hour B-10 life on direct coupled-loads
  except where footnoted
  Grease fittings with extended grease tubes
  Oversized cast iron conduit box
  Epoxy, 100% solids, Vacuum Pressure Impregnation
  (VPI) resin
  1.15 Service Factor (except where footnoted)
  Front and rear cast iron bearing caps
  Provisions for jacking bolts in all four feet
  Actual test and vibration data included with
  each motor
  Class F insulation. Form wound coils
  Internal and external epoxy finish
  Rotating shaft seals, Inpro® Smart Rings on each end
  Provisions for dowel pins in drive end feet
  Ground provisions on foot and in the conduit box
  Frames drilled with four sets of footholes, 5009,
  5010, 5011 and 5012 as standard except where
  footnoted
  Division 2 CSA certified for Class 1, Group A, B, C, D,
  temperature Code T2C @ 1.0 Service Factor
  Division 2 CSA certified for Class 1, Group A, B, C, D,
  temperature Code T2B @ 1.15 Service Factor
  IEEE-841 features available contact customer service
  for details
  "Quick Details:
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:W629
  Manufacturer:Marathon
  Enclosure:Totally Enclosed
  Frame:447/9T
  Hertz:60
  HP:250
  Mounting:Rigid Base
  Phase:3
  Voltage:460
  
  Premium Severe Duty/Chemical Processing/IEEE-841,
  Three Phase, NEMA Premium® Efficiency, Blue Chip XRI®
  Totally Enclosed, Rigid Base
  
  Applications:
  
  For extreme applications in the process industries such as chemical plants, pulp and
  paper mills, refineries, above-ground mines, food processing, foundries, and other
  severe duty environments where long life and ultra-high efficiency are required.
  Guaranteed efficiencies offer an eXtra Return on your Investment when using these
  premium efficiency motors on high cycle or long run time applications.
  
  Features:
  
  Meets or exceeds NEMA Premium® efficiencies
  Meets IEEE-841 standard for severe duty applications
  Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration
  Inpro/Seal® VBX® bearing isolators on drive end shaft extension TENV and on
  both ends of TEFC
  Provisions to add stub shaft for an encoder (182T-449T, TEFC only)
  Internal and external epoxy paint
  MAX GUARD® Class F insulation system
  1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power
  Bearing caps (254T and larger)
  Precision balanced
  Extended grease tubes, regreasable in service
  Brass drain and breather
  Meets IEEE45 USCG Marine Duty, API RPI4F for offshore platforms, IP56
  Meets NEMA MG1 - 1.26.6 Waterproof specification
  Division 2 CSA certification nameplate, for hazardous locations, Class I Groups A, B,
  C, and D
  Actual test and vibration data supplied with each motor
  Ball bearings, except where noted
  UL Recognized (through 44
  Available with Nameplate Modification (through 40 HP):
  
  2:1, 20:1, or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power
  1.25 Service Factor through 40 HP (sinewave only)
  50HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only)
  Contact Marathon Electric for optional nameplate markings on 50 HP and larger
  Quick Details:"
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:
  Manufacturer:
  Enclosure:
  Frame:
  Hertz:
  HP:
  Mounting:
  Phase:
  Voltage:
  
  Vertical Solid Shaft P-Base
  Totally Enclosed
  
  Applications:
  
  For use on: Vertical end suction, short couple, centrifugal, non-clog, mix flow,
  turbine, and propeller pumps. Totally Enclosed, Fan Cooled construction restricts the
  free exchange of ambient air inside the motor. Suitable for demanding applications in
  the process industries. HP type shafts, per NEMA MG-1, 18.625. HPH type shafts,
  severe duty features, explosion proof, and other modifications such as adding screens
  are also available through special order--contact Marathon Electric for more
  information.
  
  Features:
  Normal thrust
  Class F insulation
  1.15 Service Factor
  Suitable for 230 volt part winding start through 100 HP
  Heavy duty lifting lugs
  Drip cover/canopy cap included
  UL Recognized and CSA Certified
  "Quick Details:
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:E344
  Manufacturer:Marathon
  Enclosure:Totally Enclosed
  Frame:447/9T
  Hertz:60
  HP:250
  Mounting:Rigid Base
  Phase:3
  Voltage:575
  
  575 Volt: Premium Severe Duty/Chemical Processing
  Three Phase, NEMA Premium® Efficiency, Blue Chip XRI®
  Totally Enclosed, Rigid Base
  
  Applications:
  
  Chemical plants, paper mills, refineries, mines, food processing, foundries, and other
  severe duty environments where long life and ultra-high efficiency are desired.
  Guaranteed efficiencies offer an eXtra Return on your Investment when using these
  premium efficiency motors on high cycle or long run applications.
  
  Features:
  
  Meets or exceeds NEMA Premium® efficiencies, except where noted
  Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration
  Provisions to add stub shaft for an encoder (182T-449T, TEFC only)
  Internal and external epoxy paint
  MAX GUARD® Class F insulation system
  1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power
  Bearing caps (254 + larger)
  Precision balanced
  Extended grease tubes, regreasable in service
  Brass drain and breather
  Meets IEEE45 USCG Marine Duty, IP54 Construction
  Division 2 CSA certification nameplate, for hazardous locations,
  Class I Groups A, B, C, and D
  Actual test and vibration data supplied with each motor
  Ball Bearings, except where noted
  UL Recognized (through 449T) and CSA Certified
  Three year warranty
  Available with Nameplate Modification:
  
  2:1, 20:1 or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power
  1.25 Service Factor through 40 HP (sinewave only)
  50 HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only)
  Contact Marathon Electric for optional nameplate markings on 50 HP and larger
  Quick Details:"
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:
  Manufacturer:
  Enclosure:
  Frame:
  Hertz:
  HP:
  Mounting:
  Phase:
  Voltage:
  
  Premium Severe Duty/Chemical Processing/IEEE-841,
  Three Phase, NEMA Premium® Efficiency, Blue Chip XRI®
  Totally Enclosed, Rigid Base
  
  Applications:
  
  For extreme applications in the process industries such as chemical plants, pulp and
  paper mills, refineries, above-ground mines, food processing, foundries, and other
  severe duty environments where long life and ultra-high efficiency are required.
  Guaranteed efficiencies offer an eXtra Return on your Investment when using these
  premium efficiency motors on high cycle or long run time applications.
  
  Features:
  
  Meets or exceeds NEMA Premium® efficiencies
  Meets IEEE-841 standard for severe duty applications
  Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration
  Inpro/Seal® VBX® bearing isolators on drive end shaft extension TENV and on
  both ends of TEFC
  Provisions to add stub shaft for an encoder (182T-449T, TEFC only)
  Internal and external epoxy paint
  MAX GUARD® Class F insulation system
  1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power
  Bearing caps (254T and larger)
  Precision balanced
  Extended grease tubes, regreasable in service
  Brass drain and breather
  Meets IEEE45 USCG Marine Duty, API RPI4F for offshore platforms, IP56
  Meets NEMA MG1 - 1.26.6 Waterproof specification
  Division 2 CSA certification nameplate, for hazardous locations, Class I Groups A, B,
  C, and D
  Actual test and vibration data supplied with each motor
  Ball bearings, except where noted
  UL Recognized (through 44
  Available with Nameplate Modification (through 40 HP):
  
  2:1, 20:1, or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power
  1.25 Service Factor through 40 HP (sinewave only)
  50HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only)
  Contact Marathon Electric for optional nameplate markings on 50 HP and larger
  "Quick Details:
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:E592
  Manufacturer:Marathon
  Enclosure:Explosion Proof
  Frame:449T
  Hertz:60
  HP:300
  Mounting:Rigid Base
  Phase:3
  Voltage:460
  
  Explosion Proof, Three Phase
  Blue Chip XRI® NEMA Premium® Severe Duty
  Class I Group C & D, Class II Groups F & G, Rigid Base
  
  Applications:
  
  For use on fans, blowers, pumps, compressors, machine tools, and other equipment
  installed in hazardous environments as defined by the motor’s explosion proof class and
  group rating. Consult the National Electrical Code and your local regulations for the
  proper selection of motors in hazardous conditions.
  
  Features: Meets NEMA Premium® efficiencies
  
  10:1 Variable torque, see Inverter Duty column for constant torque
  MAX GUARD® Class F insulation
  1.15 Service Factor on sinewave or 1.0 Service Factor on IBGT power
  Normally closed thermostats (must be connected to control circuit)
  Meets UL frame temperature limit code T3B
  All cast iron construction
  Shaft slinger
  Internal and external surfaces treated with epoxy paint
  Extended grease tubes
  Nameplated 60/50 Hz, 190/380 Volts, at next lower HP where
  Quick Details:"
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:
  Manufacturer:
  Enclosure:
  Frame:
  Hertz:
  HP:
  Mounting:
  Phase:
  Voltage:
  
  Vertical Solid Shaft P-Base
  Totally Enclosed
  
  Applications:
  
  For use on: Vertical end suction, short couple, centrifugal, non-clog, mix flow,
  turbine, and propeller pumps. Totally Enclosed, Fan Cooled construction restricts the
  free exchange of ambient air inside the motor. Suitable for demanding applications in
  the process industries. HP type shafts, per NEMA MG-1, 18.625. HPH type shafts,
  severe duty features, explosion proof, and other modifications such as adding screens
  are also available through special order--contact Marathon Electric for more
  information.
  
  Features:
  
  Normal thrust
  Class F insulation
  1.15 Service Factor
  Suitable for 230 volt part winding start through 100 HP
  Heavy duty lifting lugs
  Drip cover/canopy cap included
  UL Recognized and CSA Certified
  "Quick Details:
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:E593
  Manufacturer:Marathon
  Enclosure:Explosion Proof
  Frame:449T
  Hertz:60
  HP:350
  Mounting:Rigid Base
  Phase:3
  Voltage:460
  
  Explosion Proof, Three Phase
  Blue Chip XRI® NEMA Premium® Severe Duty
  Class I Group C & D, Class II Groups F & G, Rigid Base
  
  Applications:
  
  For use on fans, blowers, pumps, compressors, machine tools, and other equipment
  installed in hazardous environments as defined by the motor’s explosion proof class and
  group rating. Consult the National Electrical Code and your local regulations for the
  proper selection of motors in hazardous conditions.
  
  Features: Meets NEMA Premium® efficiencies
  
  10:1 Variable torque, see Inverter Duty column for constant torque
  MAX GUARD® Class F insulation
  1.15 Service Factor on sinewave or 1.0 Service Factor on IBGT power
  Normally closed thermostats (must be connected to control circuit)
  Meets UL frame temperature limit code T3B
  All cast iron construction
  Shaft slinger
  Internal and external surfaces treated with epoxy paint
  Extended grease tubes
  Nameplated 60/50 Hz, 190/380 Volts, at next lower HP
  Quick Details:"
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:
  Manufacturer:
  Enclosure:
  Frame:
  Hertz:
  HP:
  Mounting:
  Phase:
  Voltage:
  
  Premium Severe Duty/Chemical Processing, Three Phase,
  NEMA Premium® Efficiency, Blue Chip XRI®
  Totally Enclosed, Rigid Base
  
  Applications:
  
  Chemical plants, paper mills, refineries, mines, food processing, foundries, and other
  severe duty environments where long life and ultra-high efficiency are desired.
  Guaranteed efficiencies offer an eXtra Return on your Investment when using these
  premium efficiency motors on high cycle or long run applications.
  
  Features:
  
  Meets or exceeds NEMA Premium® efficiencies, except where noted
  Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration
  Provisions to add stub shaft for an encoder (182T-449T, TEFC only)
  Internal and external epoxy paint
  MAX GUARD® Class F insulation system
  1.15 Service Factor on sinewave , 1.0 Service Factor on IGBT power
  Bearing caps (254T and larger)
  Precision balanced
  Extended grease tubes, regreasable in service
  Brass drain and breather
  Meets IEEE45 USCG Marine Duty, IP54 Construction
  Meets Ford EM1 Automotive Duty Specification
  Division 2 CSA certification nameplate, for hazardous locations, Class I,
  Groups A, B, C, and D
  Actual test and vibration data supplied with each motor
  Ball bearings, except where noted
  UL Recognized (through 449T) CSA Certified
  Three year warranty
  Available with Nameplate Modification (through 40 HP):
  
  2:1, 20:1, or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power
  1.25 Service Factor through 40 HP (sinewave only)
  50HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only)
  Contact Marathon Electric for optional nameplate markings on 50 HP and larger
  "Quick Details:
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:E777
  Manufacturer:MARATHON
  Enclosure:Totally Enclosed
  Frame:447/9T
  Hertz:60
  HP:450
  Mounting:Rigid Base
  Phase:3
  Voltage:460
  Premium Severe Duty/Chemical Processing, Three Phase,
  NEMA Premium® Efficiency, Blue Chip XRI®
  Totally Enclosed, Rigid Base
  
  Applications:
  
  Chemical plants, paper mills, refineries, mines, food processing, foundries, and other
  severe duty environments where long life and ultra-high efficiency are desired.
  Guaranteed efficiencies offer an eXtra Return on your Investment when using these
  premium efficiency motors on high cycle or long run applications.
  
  Features:
  
  Meets or exceeds NEMA Premium® efficiencies, except where noted
  Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration
  Provisions to add stub shaft for an encoder (182T-449T, TEFC only)
  Internal and external epoxy paint
  MAX GUARD® Class F insulation system
  1.15 Service Factor on sinewave , 1.0 Service Factor on IGBT power
  Bearing caps (254T and larger)
  Precision balanced
  Extended grease tubes, regreasable in service
  Brass drain and breather
  Meets IEEE45 USCG Marine Duty, IP54 Construction
  Meets Ford EM1 Automotive Duty Specification
  Division 2 CSA certification nameplate, for hazardous locations, Class I,
  Groups A, B, C, and D
  Actual test and vibration data supplied with each motor
  Ball bearings, except where noted
  UL Recognized (through 449T) CSA Certified
  Three year warranty
  Available with Nameplate Modification (through 40 HP):
  
  2:1, 20:1, or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power
  1.25 Service Factor through 40 HP (sinewave only)
  50HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only)
  Contact Marathon Electric for optional nameplate markings on 50 HP and larger
  Quick Details:"
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:
  Manufacturer:
  Enclosure:
  Frame:
  Hertz:
  HP:
  Mounting:
  Phase:
  Voltage:
  
  Premium Severe Duty/Chemical Processing, Three Phase,
  NEMA Premium® Efficiency, Blue Chip XRI®
  Totally Enclosed, Rigid Base
  
  Applications:
  
  Chemical plants, paper mills, refineries, mines, food processing, foundries, and other
  severe duty environments where long life and ultra-high efficiency are desired.
  Guaranteed efficiencies offer an eXtra Return on your Investment when using these
  premium efficiency motors on high cycle or long run applications.
  
  Features:
  
  Meets or exceeds NEMA Premium® efficiencies, except where noted
  Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration
  Provisions to add stub shaft for an encoder (182T-449T, TEFC only)
  Internal and external epoxy paint
  MAX GUARD® Class F insulation system
  1.15 Service Factor on sinewave , 1.0 Service Factor on IGBT power
  Bearing caps (254T and larger)
  Precision balanced
  Extended grease tubes, regreasable in service
  Brass drain and breather
  Meets IEEE45 USCG Marine Duty, IP54 Construction
  Meets Ford EM1 Automotive Duty Specification
  Division 2 CSA certification nameplate, for hazardous locations, Class I,
  Groups A, B, C, and D
  Actual test and vibration data supplied with each motor
  Ball bearings, except where noted
  UL Recognized (through 449T) CSA Certified
  Three year warranty
  Available with Nameplate Modification (through 40 HP):
  
  2:1, 20:1, or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power
  1.25 Service Factor through 40 HP (sinewave only)
  50HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only)
  Contact Marathon Electric for optional nameplate markings on 50 HP and larger
  "Quick Details:
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:Y933
  Manufacturer:MARATHON
  Enclosure:Totally Enclosed
  Frame:5013LS
  Hertz:60
  HP:700
  Mounting:Rigid Base
  Phase:3
  
  Features:
  Blue Chip® quality, cast iron construction for rigidity
  and reduced vibration
  Open Conrad radial ball bearings rated at
  100,000 hour B-10 life on direct coupled-loads
  except where footnoted
  Grease fittings with extended grease tubes
  Oversized cast iron conduit box
  Epoxy, 100% solids, Vacuum Pressure Impregnation
  (VPI) resin
  1.15 Service Factor (except where footnoted)
  Front and rear cast iron bearing caps
  Provisions for jacking bolts in all four feet
  Actual test and vibration data included with
  each motor
  Class F insulation. Form wound coils
  Internal and external epoxy finish
  Rotating shaft seals, Inpro® Smart Rings on each end
  Provisions for dowel pins in drive end feet
  Ground provisions on foot and in the conduit box
  Frames drilled with four sets of footholes, 5009,
  5010, 5011 and 5012 as standard except where
  footnoted
  Division 2 CSA certified for Class 1, Group A, B, C, D,
  temperature Code T2C @ 1.0 Service Factor
  Division 2 CSA certified for Class 1, Group A, B, C, D,
  temperature Code T2B @ 1.15 Service Factor
  IEEE-841 features available contact customer service
  for details
  Quick Details:"
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:
  Manufacturer:
  Enclosure:
  Frame:
  Hertz:
  HP:
  Model No.:
  Mounting:
  Phase:
  Voltage:
  
  JP Close-Coupled Pump, Single Phase
  Dripproof, C-Face with Rigid Base
  
  Applications:
  
  Close-coupled pumps where the pump impeller is mounted directly on the motor
  shaft in environments that are relatively clean and dry.
  
  Features:
  
  NEMA JP pump shaft dimensions
  Ball bearings, mechanically locked on shaft end
  Capacitor start design
  Continuous duty
  1.15 Service Factor
  UL Recognized and CSA Certified
  "Quick Details:
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:E798
  Manufacturer:Marathon
  Enclosure:Dripproof
  Frame:143T
  Hertz:60
  HP:1.5
  Model No.:143TTDR4006
  Mounting:Rigid Base
  Phase:3
  Voltage:575
  
  575 Volt: General Purpose, Three Phase
  Dripproof, Rigid Base
  
  Applications:
  
  General purpose use on compressors, pumps, conveyors, fans, blowers, and other
  machinery in environments that are relatively clean and dry where 575 volt three
  phase power is readily available.
  
  Features:
  
  Ball bearings
  NEMA Service Factors
  UL Recognized and CSA Certified
  Quick Details:"
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:
  Manufacturer:
  Enclosure:
  Frame:
  Hertz:
  HP:
  Model No.:
  Mounting:
  Phase:
  Voltage:
  
  575 Volt: JM Close-Coupled Pump, Three Phase
  Dripproof, C-Face and C-Face with Rigid Base
  
  Applications:
  
  Close-coupled pumps where the pump impeller is mounted directly on the motor
  shaft in environments that are relatively clean and dry. For use outdoors an
  enclosure or drip cover may be required (see Accessories section).
  
  Features:
  
  NEMA JM pump shaft dimensions
  JMV frame includes drip cover for vertical mount without base
  JM frame has rigid base, drip cover not included
  Ball bearings, mechanically locked on shaft end
  Continuous duty
  1.15 Service Factor
  UL Recognized and CSA Certified
  UL Listed for Fire Pump applications
  "Quick Details:
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:U124
  Manufacturer:Marathon
  Enclosure:Dripproof
  Frame:143JP
  Hertz:60
  HP:1
  Model No.:143TTDR4048
  Mounting:C-Face/Vertical and C-Face with Rigid Base
  Phase:3
  Voltage:575
  
  575 Volt: JP Close-Coupled Pump, Three Phase
  Dripproof, C-Face/Vertical and C-Face with Rigid Base
  
  Applications:
  
  Close-coupled pumps where the pump impeller is mounted directly on the motor
  shaft in environments that are relatively clean and dry. For use outdoors an
  enclosure or drip cover may be required (see Accessories section).
  
  Features:
  
  NEMA JP pump shaft dimensions
  JPV frame includes drip cover for vertical mount without base
  JP frame has rigid base, drip cover not included
  Ball bearings, mechanically locked on shaft end
  Continuous duty
  1.15 Service Factor
  UL Recognized and CSA Certified
  UL Listed for Fire Pump applications
  Quick Details:"
  Brand Name:
  Place of Origin:USA
  
  Specifications
  Catalog Number:
  Manufacturer:
  Enclosure:
  Frame:
  Hertz:
  HP:
  Model No.:
  Mounting:
  Phase:
  Voltage:
  
  Premium Severe Duty/Chemical Processing, Three Phase,
  NEMA Premium® Efficiency, Blue Chip XRI®
  Totally Enclosed, Rigid Base

• Company:

  Electric Motors Dept, Chengdu AS Machinery Co.,Ltd.     [ China ]        

• Contact:

  Robin Hu

• Tel:

  862865856704

• Fax:

  862886129221

• Email:

  snowhu1@qq.com