Matting Agent M-60

• Post Date:

  Jan 03,2015

• Expiry Date:

  Jan 03,2016

• Detailed Description:

  Quantity: 100Kilograms
  Specs:matting agent
  Payment Method: T/T in advance
  Outdoor matting agent M-60
  M-60 is a kind of weatherability matting agent. It is mainly used for Polyester / TGIC powder coating system and it is suitable for the gloss more than 10%@60°.
  The characteristic of M-60 is to offer the good mechanical property,excellent leveling property, smooth coating property and the perfect anti-yellowing property in the power coating.It is not sensitive to the extrusion process and it is suitable for wide range of polyester resin as well.
  
  Technical Parameters
  ★Appearance: white or light yellow powder
  ★Bulk density :550-650 g / l
  ★Solid Content : 99%
  
  Product application and performance
  ★Matting agent M-60 can be squeezed directly when pre-mixed with other materials in the process of production
  ★The powder paints and coatings made from the M-60 is smooth and never getting yellow
  ★It is suitable for wide range of polyester resin, It can match the most of the polyester and provide a good matting effect.
  ★You can choose to add suitable accelerator / catalyst to improve impact performance, but it may cause the rise of coating surface gloss and the reduce of the leveling performance.
  ★The powder coatings made of the M-60 has a good storage stability and excellent repeated extrusion performance.
  ★Recommended extrusion temperature: I District 95 ℃, II District 110 ℃; recommended curing condition: 200 ℃ * 12min or 190 ℃ * 15min.
  ★Heavy metal contents in the product conforms to the requirment of EU Rosh standard.
  
  Recommended usage
  The usage of M-60 is 1-4% of the total amount for powder coating formulations,it is suitable for 10%@60 degrees above gloss, The more of the usage, the gloss will be lower. If you need much lower gloss, you can increase the dosage to 5% as appropriate
  Reference formulation
  Material Supplier Formula 1 Formula 2 Formula 3 Formula 4 Formula 5
  SJ4ET Shenjian 560
  P4600 DSM 560
  P4900 DSM 560
  NH3307 Kinte 560
  EL6600A Chansieh 560
  TGIC Niutang 42 42 42 42 42
  Styrax 10 10 10 10 10
  Barium sulfate 3 3 3 3 3
  Titanium pigment 337 337 337 337 337
  Carbon blacksMA-100 8 8 8 8 8
  M-60 Matting Agent 40 40 40 40 40
  Total 1000g 1000g 1000g 1000g 1000g
  Extrusion conditions 　　　　　　The best：Idistrict 95℃，II district 110℃
  Baking Conditions 200℃*12min or 190℃*15min
  Glossy %@60° 14% 15.9% 20% 18.4% 19.8%
  Appearance Full, flat ,smooth and clear
  Impact Kg.cm +/-50 +/-50 +/-50 +/-50 +/-50
  Note:It should be better to use the slow curing polyester, or the fast curing polyester used in conjunction with the slow curing polyester.
  Precautions for Use
  ★Avoid directly contact with the skin and inhaled the product. Tacking the relevant protective measures before using, Such as wearing safety clothing, nursing Eyepiece, protective gloves and dust proof equipment.
  ★If it gets into eyes, please rinse with water immediately.If the symptom is not eliminate please seek medical advice.
  ★Please put the latest MSDS in a conspicuous place, it contains the label, transport, storage, product use, safety and toxicity information etc.
  5.Package and storage
  The product is packed in polyethylene-lined composite kraft bag, the net weight is 25 KG per bag .
  Sealed, please store in a cool and dry place, far away from heat and fire. Avoid direct sunlight. The reasonable shelf life is at least two years.

• Company:

  Anhui Kingcham Chemical Technoly Co.,Ltd.     [ China ]        

• Contact:

  Kitty Zhang

• Tel:

  86-551-63830671

• Fax:

  86-551-63830871

• Email:

  zhangy@kingcham.com