Oriental Closed Loop Stepper Motor and Driver Packages

• Post Date:

  Jul 19,2013

• Expiry Date:

  Jul 19,2014

• Detailed Description:

  Quick Details:
  Brand Name:OrientalOriental
  Place of Origin:Japan
  Series:AC Input Stepper Motor & Driver Systems
  Specifications:
  The AR series with built-in controller substantially reduces heat
  generation from the motor through the use of high-efficiency
  technology. In addition to implementing the closed loop control
  based on Oriental Motor's original AlphaStep technology, the AR
  Series also achieves up to 40% less power consumption, low
  vibration, improved angle accuracy and is capable of driving
  large inertia loads. Because it is a stepper motor, there is no hunting or gain tuning.
  FLEX is the generic name for products that are used for Factory
  Automation (FA) network control via I/O control, Modbus (RTU)
  control, or a network converter. FLEX products enable easy
  connection, easy control and reduce the complexity of system configuration.
  The AR Series features frame sizes from 1.65 in. (42mm) up to 3.54 in.
  (90mm) available with a wide range of gear options and
  electromagnetic brake. Available in Single-Phase
  100-120 VAC or Single-Phase 200-240 VAC power input.
  All packages include a 9.8 ft. (3 m) motor cable.
  
  Quick Details:
  Brand Name:Oriental
  Place of Origin:Japan
  Series:AC Input Stepper Motor & Driver Systems
  Specifications:
  The AR series substantially reduces heat generation from
  the motor through the use of high-efficiency technology.
  In addition to implementing the closed loop control based on
  Oriental Motor's original AlphaStep technology, the AR Series
  also achieves up to 40% less power consumption, low vibration,
  improved angle accuracy and is capable of driving large
  inertia loads. Because it is a stepper motor, there is no hunting or gain tuning.
  The AR Series features frame sizes from 1.65 in. (42mm) up to 3.54 in.
  (90mm) available with a wide range of gear options and electromagnetic
  brake. The driver for the AR Series is available in three power supply
  voltages; Single-Phase 100-115 VAC, Single-Phase 200-230 VAC and
  Three-Phase 200-230 VAC. All packages include a 9.8 ft. (3 m) motor cable.
  
  Quick Details:
  Brand Name:Oriental
  Place of Origin:Japan
  Series:AC Input Stepper Motor & Driver Systems
  Specifications:
  The AlphaStep with Built-in Controller offers the simplicity of a stepper
  motor with closed loop control and the added simplicity of a built-in
  controller. Using Oriental Motor's closed loop control, the AlphaStep
  with Built-in Controller uses a built-in feedback device that constantly
  monitors the motor shaft position to detect and correct for loss of
  synchronism even during abrupt load fluctuations and accelerations.
  The built-in controller driver has an integrated controller which ensures a
  simple, efficient solution and is computer-programmable via an RS-232C connection.
  The AlphaStep with Built-in Controller features frame sizes from 1.65 in.
  (42mm) up to 3.54 in. (90mm) available with a wide range of gear
  options and electromagnetic brake. The driver is available in
  three power supply voltages; Single-Phase 100-115 VAC,
  Single-Phase 200-230 VAC and Three-Phase 200-230 VAC.
  
  Quick Details:
  Brand Name:Oriental
  Place of Origin:Japan
  Series:AC Input Stepper Motor & Driver Systems
  Specifications:
  The RK Series incorporates a 0.72° high resolution stepper motor
  with an AC input, microstepping driver to achieve guaranteed low
  vibration and low noise while offering exceptional value and
  performance. The RK Series offers Smooth Drive, a function that
  ensures low vibration and low noise independently of the
  input pulse frequency along with improved current control
  for improved step angle accuracy.
  The RK Series offers a standard motor type, IP65 rated motor type,
  Harmonic, Planetary and Taper Hobbed geared stepper motors as
  well as three frame sizes of 1.65 in. (42 mm), 2.36 in. (60 mm)
  and 3.35 in. (85 mm) [3.54 in. (90 mm)]. Encoder options are also available.
  
  Quick Details:
  Brand Name:Oriental
  Place of Origin:Japan
  Series:AC Input Stepper Motor & Driver Systems
  Specifications:
  The SCX11 is a highly-functional and sophisticated controller equipped
  with program editing and execution functions. Use the SCX11 as a
  stored program controller to connect to any of Oriental Motor's
  standard pulse input drivers. The SCX11 is also able to
  control the motor via serial communications such as USB, RS-232C and CANopen.
  The SCX11 replaces the SCX10 while retaining the same functions, software and
  communications interface.
  
  Quick Details:
  Brand Name:Oriental
  Place of Origin:Japan
  Series:he AR series with built-in controller
  Specifications:
  The AR series with built-in controller substantially reduces heat generation
  from the motor through the use of high-efficiency technology. In addition
  to implementing the closed loop control based on Oriental Motor's original
  AlphaStep technology, the AR Series also achieves up to 40% less
  power consumption, low vibration, improved angle accuracy and
  is capable of driving large inertia loads. Because it is a stepper motor,
  there is no hunting or gain tuning.
  FLEX is the generic name for products that are used for Factory Automation
  (FA) network control via I/O control, Modbus (RTU) control, or a
  network converter. FLEX products enable easy connection, easy
  control and reduce the complexity of system configuration.
  The AR Series features frame sizes from 1.10 in. (28 mm) up to 3.54 in.
  (90 mm) available with a wide range of gear options and electromagnetic
  brake. The driver uses either 24 or 48 VDC. [Only 24 VDC is available
  for 1.10 in. (28 mm) motors.] All packages include a 3 m (9.8 ft.) motor cable.
  
  Quick Details:
  Brand Name:Oriental
  Place of Origin:Japan
  Series:The AR series
  Specifications:
  The AR series substantially reduces heat generation from the
  motor through the use of high-efficiency technology. In addition
  to implementing the closed loop control based on Oriental Motor's
  original AlphaStep technology, the AR Series also achieves up
  to 40% less power consumption, low vibration and is capable
  of driving large inertia loads. Because it is a stepper motor,
  there is no hunting or gain tuning.
  The AR Series features frame sizes from 1.10 in. (28mm) up
  to 3.54 in. (90mm) available with a wide range of gear options
  and electromagnetic brake. The driver uses either 24 or 48 VDC.
  [Only 24 VDC is available for 1.10 in. (28 mm) motors.]
  All packages include a 3 m (9.8 ft.) motor cable.
  
  Quick Details:
  Brand Name:Oriental
  Place of Origin:Japan
  Series:The CRK Series
  Specifications:
  The CRK Series with a built-in controller and self correction
  function is a motor, driver and built-in controller package that
  features a 0.36° or 0.72° High Torque or Standard
  type stepper motor with a , microstepping driver
  with a powerful feature rich controller built in. The CRK
  Series provides the lowest vibration and the highest positional
  accuracy. The driver with built-in controller supports stand
  alone or RS-485 communications with multi-drop
  capability for network operation and I/O control.
  The CRK Series is available with 5 frame sizes of 0.79 in.
  (20 mm), 1.10 in. (28mm), 1.18 in. (30mm), 1.65 in.
  (42 mm) and 2.36 in. (60 mm), 4 geared types and a
  3-channel differential (line driver type) encoder options.
  
  Quick Details:
  Brand Name:Oriental
  Place of Origin:Japan
  Series:The CRK Series
  Specifications:
  The CRK Series is a motor and driver package that combines a
  0.36° or 0.72° High Torque or Standard type stepper motor
  with a , microstepping driver, providing the lowest
  vibration and highest positional accuracy. The CRK Series
  adopts a , lightweight driver with our Smooth Drive
  technology, allowing your system to utilize the performance
  of the 0.36° or 0.72° motor without changing your controller output pulses.
  The CRK Series is available with 5 frame sizes of 0.79 in.
  (20 mm), 1.10 in. (28mm), 1.18 in. (30mm), 1.65 in.
  (42 mm) and 2.36 in. (60 mm), 4 geared types and encoder options.
  
  Quick Details:
  Brand Name:Oriental
  Place of Origin:Japan
  Series:The RBK Series
  Specifications:
  The RBK Series is a stepper motor and driver package consisting
  of a 1.8° step angle stepper motor and DC input microstepping
  driver. The RBK Series offers a High-Torque or Standard
  stepper motor, a terminal box type stepper motor which is IP65
  rated or a Planetary geared stepper motor. The RBK Series
  offers the highest torque for the entire speed range and adopts
  our Smooth Drive technology, allowing for maximum
  performance without changing your controller output pulses.
  The RBK Series is available with 5 frame sizes of 1.10 in. (28mm),
  1.38 in. (35mm), 1.65 in. (42 mm), 2.22 in. (56.4mm) [2.36 in.
  (60 mm) Geared] and 3.35 in. (85mm), geared types and encoder options.
  
  Quick Details:
  Brand Name:Oriental
  Place of Origin:Japan
  Series:The ASX Series
  Specifications:
  The ASX Series is an all-in-one closed loop stepping motor,
  driver and controller with the feedback built in. The
  ASX Series utilizes our Alpha Step technology which prevents
  the motor from losing synchronism even when subjected
  to abrupt load fluctuation or accelerations. The built-in rotor
  position detection sensor constantly monitors the motor movement.
  If synchronism is about to be lost, closed loop control is used,
  eliminating concern over loss of steps.
  The ASX Series offers three control methods, Pulse Input Mode,
  RS-232C and I/O Control Mode (Sequence Operation Mode)
  to meet a wide variety of applications. Available in a 2.36 in.
  (60mm) frame size, with two packages, the Basic package or
  the Developers package (everything included).
  
  Quick Details:
  Brand Name:Oriental
  Place of Origin:Japan
  Series:The CMK Series
  Specifications:
  The CMK Series is a motor and driver package that combines
  a 0.9° or 1.8° High-Torque or Standard type stepper motor
  or geared 1.8° stepper motor with one of the smallest,
  lightest 24 VDC input microstepping drivers in the industry.
  This system can divide the basic step angle by a maximum
  of 16 resolutions without the use of a reduction
  mechanism or other mechanical elements, allowing for a
  reduction in size and lower vibration in your equipment.
  Five frame sizes are available; 1.10 in. (28 mm), 1.38 in.
  (35 mm), 1.65 in. (42 mm), 1.97 in. (50 mm) and 2.22 in.
  (56.4 mm) [2.36 in. (60 mm)]. Models equipped with an encoder are also available.
  
  Quick Details:
  Brand Name:Oriental
  Place of Origin:Japan
  Series:The E00 Series
  Specifications:
  The E00 Series controllers allow for easy programming
  using simple commands. The dual axis model provides coordinated
  moves via linear interpolation. Using RS232C with or without
  optional operator interface unit OP300, various motion profiles
  can be achieved by using up to 32 sequence programs.
  One program can be dedicated as a STARTUP program.
  The E00 Series is designed for optimal performance
  with any of Oriental Motor's standard pulse input drivers.
  
  Quick Details:
  Brand Name:Oriental
  Place of Origin:Japan
  Series:the SG8030 Series
  Specifications:
  With the SG8030 Series, all operations including data setting can
  easily be performed using the four touch-screen buttons on the
  top panel. In addition, the number of signal lines is reduced to
  a minimum for easy connection.
  
  Quick Details:
  Brand Name:Oriental
  Place of Origin:Japan
  Series:The 0.36° Stepper Motors, High-Torque
  Specifications:
  The 0.36° Stepper Motors, High-Torque type provides 1,000 steps
  per revolution by having 100 teeth on the rotor and contributes to the
  highest resolution and lowest vibration. This motor also achieves
  improved stopped positional accuracy of 2 arc minutes.
  These motors are available in frame sizes from 1.10 in. (28 mm) up
  to 2.36 in. (60 mm). Encoder options are available as a standard offering.
  
  Quick Details:
  Brand Name:Oriental
  Place of Origin:Japan
  Series:The 0.72° Stepper Motors
  Specifications:
  The 0.72° Stepper Motors are available in High-Torque, Standard
  or Terminal Box (IP65) type. The 0.72° Stepper Motors offers
  improved performance and reduced vibration.
  These motors are available in frame sizes from 0.79 in. (20 mm)
  to 3.35 in. (85 mm). Encoder option is available on High-Torque and Standard types.
  
  Quick Details:
  Brand Name:Oriental
  Place of Origin:Japan
  Series:The 0.9° Stepper Motors
  Specifications:
  The 0.9° Stepper Motors offers improved performance and reduced vibration.
  These motors are available in 1.65 in. (42 mm) and 2.22 in. (56.4 mm)
  frame sizes. Encoder options are available.
  
  Quick Details:
  Brand Name:Oriental
  Place of Origin:Japan
  Series: PKP Series
  Specifications:
  In addition to offering high torque, the PKP Series stepper motors
  offer more variety of electrical specifications, more frame sizes,
  encoder models and geared type motors, for the optimum stepper motor solutions.
  The PKP Series is available in 0.79 in. (20 mm), 1.10 in. (28 mm), 1.38 in.
  (35 mm), 1.65 in. (42 mm) and 2.22 in. (56.4 mm) frame sizes.
  Also available in a 1.8° stepper motor is our High Torque-High Efficient
  type or Terminal Box type or our High Inertia type stepper motors.
  
  Quick Details:
  Brand Name:Oriental
  Place of Origin:Japan
  Series:Step Angle 0.72° or 1.8°
  Specifications:
  Basic Step Angle 0.72° or 1.8°
  Non-backlash types (Harmonic and Plantary gears)
  Low Backlash types (Planetary and Taper Hobbed gears)
  New! Spur gears
  Encoder models available
  Available frame sizes:
  0.79 in. (20 mm)
  1.10 in. (28 mm)
  1.65 in. (42 mm)
  2.36 in. (60 mm)
  3.54 in. (90 mm)

• Company:

  Electric Motors Dept, Chengdu AS Machinery Co.,Ltd.     [ China ]        

• Contact:

  Robin Hu

• Tel:

  862865856704

• Fax:

  862886129221

• Email:

  snowhu1@qq.com