Wood hammer mill is used to crush material by the collision between the high-speed hammer and materials. It is more suitable for milling relatively soft raw material like tree branch, cotton stalk, wheat straw etc. with diameter less than 50mm.After milled. the output size can reach diameter 3-5mm, then it is suitable for further processing.
Wood Hammer Working Theory
Hammer miss is made up of various beaters which rotate at high speed in the grinding chamber. The raw material is normally fed from the feed inlet and then instantly drops into crushing chamber where they are crushed and compressed by the beaters. Because of the speed and the number of the beaters, the material can be crushed to fine powder within a short period. You can adjust the clearance between and screens to get different size sawdust.
1.The hammer mill has obvious advantages of consuming less energy but offering efficiency in grinding. labour and time saving.
2.Both coarse and fine grinding can be realized in short time.
3.The right aspiration can make materials go through screen quickly, reducing temperature of grinding chamber and increasing output efficiency.
Wood Hammer Mil Technical Data
Model | FSP56*36 | FSP56*40 | FSP60*30 | FSP60*45 | FSP60*60 | FSP60*75 | FSP112*40 |
Capacity | 2.5--5t/h | 4--7t/h | 2--5.5t/h | 5--9t/h | 6--10t/h | 8--13t/h | 12--22t/h |
Diameter of rotor | 560mm | 560mm | 600mm | 600mm | 600mm | 600mm | 1120mm |
Width of chamber | 360mm | 400mm | 300mm | 450mm | 600mm | 750mm | 400mm |
Hammer QTY | 20 | 24 | 24 | 44 | 48 | 60 | 40 |
Speed of rotor | 2980r/min | 2980r/min | 2980r/min | 2980r/min | 2980r/min | 2980r/min | 1440r/min |
Power | 18.5/22kw | 30/37kw | 18.5/22kw | 45/55kw | 75/90kw | 90/110kw | 90/110kw |