Offter to Sell

surface roughness tester SRT-6200

  • Post Date:

    Oct 11,2014
  • Expiry Date:

    Oct 11,2015
  • Detailed Description:

    Cas No. :SRT-6200 Quantity: 1000
    Price:1 USD Metric Tons
    Payment Method: T/T, western union
    Model:SRT6200
    1.FEATURES
    This instrument is compatible with four standards of
    ISO, DIN, ANSI and JIS and is widely used in production
    site to measure surface roughness of various
    machinery-processed parts, calculate corresponding
    parameters according to selected measuring conditions
    and clearly display all measurement parameters.
    When measuring the roughness of a surface, the
    sensor is placed on the surface and then uniformly
    slides along the surface by driving the mechanism
    inside the tester. The sensor gets the surface roughness
    by the sharp built-in probe. This roughness causes
    displacement of the probe which results in change of
    inductive amount of induction coils so as to generate
    analogue signal, which is in proportion to the surface
    roughness at output end of phase-sensitive rectifier.
    The exclusive DSP processes and calculates and then
    outputs the measurement results on LCD.
    * Very easy to operate
    * Multiple parameter measurement: Ra, Rz
    * Highly sophisticated inductance sensor
    * control circuit with high capacity
    * Small in size, light in weight and easy to use
    * Can communicate with PC computer for statistics,
    printing and analysing by the optional cable and the
    software for RS232C interface.
    *Manual or automatic shut down. The tester can be
    switched off by pressing the Power key at any time.
    On the other hand, the tester will power itself off
    about 5 minutes after the last key operation.
    2.SPECIFICATIONS
    Display: 4 digits, 10 mm LCD, with blue backlight
    Parameters: Ra, Rz
    Display Range
    Ra: 0.05-10.00um/1.000-400.0uinch
    Rz: 0.020-100.0um/0.780-4000uinch
    Accuracy: Not more than 10%
    Fluctuation of display value: Not more than 6%
    Sensor :
    Test Principle: Inductance type
    Radius of Probe Pin: 10um
    Material of Probe Pin: Diamond
    Measurement Force of Probe: 16mN(1.6gf)
    Probe Angle: 90°
    Vertical Radius of Guiding Head: 48mm
    Maximum driving stroke: 17.5mm/0.7inch
    Cutoff length (l): 0.25mm / 0.8mm / 2.5mm optional
    Evaluation length: 1~5 cut off optional
    Driving speed:
    sampling length = 0.25mm Vt=0.135mm/s
    sampling length = 0.8mm Vt=0.5mm/s
    sampling length = 2.5mm Vt=1mm/s
    returning Vt=1mm/s
    Resolution : 0.001μm if reading <10μm
    0.01μm if 10μm≤reading<100μm
    0.1μm if reading ≥100μm
    Operating conditions: Temp. 0-50℃
    Humidity <80%
    Size:140x57x48 mm (5.5x2.2x1.9 inch)
    Weight: about 420 g
    Attachment:
    Standard Sensor RP-100
    Groove Stylus SRP-110
    curvature Probe SRP-120
    Extension Rod SER-150
    Mesurement Stand SRS-1
    Standard Sample Plate SSP-180
    Cable and Software for RS-232/USB)
  • CAS Registry Number:

    SRT-6200
  • Company:

    Guangzhou Landtek Instruments CO.LDT     [ China ]        
  • Contact:

    ada
  • Tel:

    86-020-81609116
  • Fax:

    86-020-81509478
  • Email:

    lily@landteknet.com
Inquiry
Home Suppliers Product CAS Gmall