titanium pipes

• Post Date:

  Nov 11,2013

• Expiry Date:

  May 10,2014

• Detailed Description:

  A reference standard
  1. GB 228 metal tensile test method
  2. GB 224 metal tube hydraulic experimental methods
  3. GB 226 metal tube flattening experimental methods
  4. GB/T3620.1 titanium and titanium alloys and chemical composition
  5. GB/T3620.2 titanium and titanium alloy products chemical composition and ingredients of tolerance
  Two technical requirements
  1 sheet of titanium and titanium alloys chemical composition shall conform to the provisions of GB/T3620.1, demand-side reinspection, the chemical composition of the tolerances shall comply with the provisions of GB/T3620.2.
  (2) Pipe OD tolerances shall comply with the provisions in Table a.
  3 pipe wall thickness tolerances shall not exceed its nominal wall thickness ± 12.5%, pipe wall thickness tolerances apply to titanium welded pipe welds.
  4 pipe length should comply with Table II requirements.
  5. Pipe length or double length should be within the scope of its non-random length, cut length allowable deviation of +10 mm, double length should also be included in the amount of cut when cutting pipe, the amount of each incision should be 5mm.

• Company:

  Baoji Hengli Metal Materials Co., Ltd.     [ China ]        

• Contact:

  Runjun Wang

• Tel:

  86-0917-6739200

• Fax:

  86-0917-6739200

• Email:

  316434195@qq.com