Marathon General Purpose Motors
Inquiry
| Post Date: | Jul 19,2013 |
| Expiry Date: | Jul 19,2014 |
| Detailed Description: |
"Quick Details:
Brand Name: Place of Origin:USA Specifications Catalog Number:Z421 Manufacturer:MARATHON Enclosure:Dripproof Frame:143JP Hertz:60 HP:1.5 Mounting:C-Face with Rigid Base Phase:1 Voltage:115/208-230 JP Close-Coupled Pump, Single Phase Dripproof, C-Face with Rigid Base Applications: Close-coupled pumps where the pump impeller is mounted directly on the motor shaft in environments that are relatively clean and dry. Features: NEMA JP pump shaft dimensions Ball bearings, mechanically locked on shaft end Capacitor start design Continuous duty 1.15 Service Factor UL Recognized and CSA Certified Quick Details:" Brand Name: Place of Origin:USA Specifications Catalog Number: Manufacturer: Enclosure: Frame: Hertz: HP: Mounting: Phase: Voltage: JP Close-Coupled Pump, Three Phase Dripproof, C-Face/Vertical and C-Face with Rigid Base Applications: Close-coupled pumps where the pump impeller is mounted directly on the motor shaft in environments that are relatively clean and dry. Features: NEMA JP pump shaft dimensions JPV frame includes drip cover for vertical mount without base JP frame has rigid base, drip cover not included Ball bearings, mechanically locked on shaft end Continuous duty 1.15 Service Factor UL Recognized and CSA Certified UL Listed for Fire Pump applications except where footnoted "Quick Details: Brand Name: Place of Origin:USA Specifications Catalog Number:M104 Manufacturer:MARATHON Enclosure:Dripproof Frame:143JPV Hertz:60 HP:1.5 Mounting:C-Face/Vertical and C-Face with Rigid Base Phase:3 Voltage:208-230/460 JP Close-Coupled Pump, Three Phase Dripproof, C-Face/Vertical and C-Face with Rigid Base Applications: Close-coupled pumps where the pump impeller is mounted directly on the motor shaft in environments that are relatively clean and dry. Features: NEMA JP pump shaft dimensions JPV frame includes drip cover for vertical mount without base JP frame has rigid base, drip cover not included Ball bearings, mechanically locked on shaft end Continuous duty 1.15 Service Factor UL Recognized and CSA Certified UL Listed for Fire Pump applications except where footnoted Quick Details:" Brand Name: Place of Origin:USA Specifications Catalog Number: Manufacturer: Enclosure: Frame: Hertz: HP: Mounting: Phase: Voltage: Premium Severe Duty/Chemical Processing/IEEE-841, Three Phase, NEMA Premium® Efficiency, Blue Chip XRI® Totally Enclosed, Rigid Base Applications: For extreme applications in the process industries such as chemical plants, pulp and paper mills, refineries, above-ground mines, food processing, foundries, and other severe duty environments where long life and ultra-high efficiency are required. Guaranteed efficiencies offer an eXtra Return on your Investment when using these premium efficiency motors on high cycle or long run time applications. Features: Meets or exceeds NEMA Premium® efficiencies Meets IEEE-841 standard for severe duty applications Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration Inpro/Seal® VBX® bearing isolators on drive end shaft extension TENV and on both ends of TEFC Provisions to add stub shaft for an encoder (182T-449T, TEFC only) Internal and external epoxy paint MAX GUARD® Class F insulation system 1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power Bearing caps (254T and larger) Precision balanced Extended grease tubes, regreasable in service Brass drain and breather Meets IEEE45 USCG Marine Duty, API RPI4F for offshore platforms, IP56 Meets NEMA MG1 - 1.26.6 Waterproof specification Division 2 CSA certification nameplate, for hazardous locations, Class I Groups A, B, C, and D Actual test and vibration data supplied with each motor Ball bearings, except where noted UL Recognized (through 44 Available with Nameplate Modification (through 40 HP): 2:1, 20:1, or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power 1.25 Service Factor through 40 HP (sinewave only) 50HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only) Contact Marathon Electric for optional nameplate markings on 50 HP and larger: "Quick Details: Brand Name: Place of Origin:USA Specifications Catalog Number:K083 Manufacturer:Marathon Enclosure:Dripproof Frame:56HZ Hertz:60 HP:1.5 Mounting:Rigid Base Phase:3 Voltage:575 575 Volt: General Purpose, Three Phase Dripproof, Rigid Base Applications: General purpose use on compressors, pumps, conveyors, fans, blowers, and other machinery in environments that are relatively clean and dry where 575 volt three phase power is readily available. Features: Ball bearings NEMA Service Factors UL Recognized and CSA Certified Quick Details:" Brand Name: Place of Origin:USA Specifications Catalog Number: Manufacturer: Enclosure: Frame: Hertz: HP: Mounting: Phase: Voltage: Condenser Fan, Three Phase, Open Air Over 56 Frame, Belly Band/Resilient Mount Applications: Commercial condenser fans may be installed outdoors. These motors need to be mounted within the airflow of the fan for proper cooling. Used on Trane, Carrier, Climtrol and York units, 5 tons and larger. Features: Enclosed shaft end bracket, vented frame 60°C ambient Automatic reset thermal protector Nameplate 60/50 hertz 190/380 volts, at next lower HP Double sealed ball bearings 5/8"" Dia. x 5"" long shaft with flat and keyway Shaft slinger Threaded lead exit Patented VCD™ - Voltage Change Device 4 Locating screws 90 degrees apart, 3.33"" from outer edge of shaft slinger Hubs on both ends will accept resilient base kits, see Accessories section (except X524 and X526 - horizontal only) Ball Bearings UL Recognized and CSA Certified "Quick Details: Brand Name: Place of Origin:USA Specifications Catalog Number:M809 Manufacturer:MARATHON Enclosure:Dripproof Frame:213HP Hertz:60 HP:10 Mounting:P-Base Phase:3 Voltage:230/460 Vertical Solid Shaft P-Base Dripproof Applications: For use on: Vertical end suction, short couple, centrifugal, non-clog, mix flow, turbine, and propeller pumps. HP type shafts, per NEMA MG-1 18.625. HPH and TCV type shafts, single phase, wound rotor designs, and other modifications such as adding screens are also available through special order--contact Marathon Electric for more information. Features: Normal thrust Ball bearings Class B insulation 1.15 Service Factor Suitable for 230 volt part winding start through 100 HP Heavy duty lifting lugs Drip cover/canopy cap included UL Recognized and CSA Certified Quick Details:" Brand Name: Place of Origin:USA Specifications Catalog Number: Manufacturer: Enclosure: Frame: Hertz: HP: Mounting: Phase: Voltage: Vertical Solid Shaft P-Base Dripproof Applications: For use on: Vertical end suction, short couple, centrifugal, non-clog, mix flow, turbine, and propeller pumps. HP type shafts, per NEMA MG-1 18.625. HPH and TCV type shafts, single phase, wound rotor designs, and other modifications such as adding screens are also available through special order--contact Marathon Electric for more information. Features: Normal thrust Ball bearings Class B insulation 1.15 Service Factor Suitable for 230 volt part winding start through 100 HP Heavy duty lifting lugs Drip cover/canopy cap included UL Recognized and CSA Certified "Quick Details: Brand Name: Place of Origin:USA Specifications Catalog Number:M887 Manufacturer:MARATHON Enclosure:Totally Enclosed Frame:284HP Hertz:60 HP:10 Mounting:P-Base Phase:3 Voltage:230/460 Vertical Solid Shaft P-Base Totally Enclosed Applications: For use on: Vertical end suction, short couple, centrifugal, non-clog, mix flow, turbine, and propeller pumps. Totally Enclosed, Fan Cooled construction restricts the free exchange of ambient air inside the motor. Suitable for demanding applications in the process industries. HP type shafts, per NEMA MG-1, 18.625. HPH type shafts, severe duty features, explosion proof, and other modifications such as adding screens are also available through special order--contact Marathon Electric for more information. Features: Normal thrust Class F insulation 1.15 Service Factor Suitable for 230 volt part winding start through 100 HP Heavy duty lifting lugs Drip cover/canopy cap included UL Recognized and CSA Certified Quick Details:" Brand Name: Place of Origin:USA Specifications Catalog Number: Manufacturer: Enclosure: Frame: Hertz: HP: Mounting: Phase: Voltage: Vertical Solid Shaft P-Base Totally Enclosed Applications: For use on: Vertical end suction, short couple, centrifugal, non-clog, mix flow, turbine, and propeller pumps. Totally Enclosed, Fan Cooled construction restricts the free exchange of ambient air inside the motor. Suitable for demanding applications in the process industries. HP type shafts, per NEMA MG-1, 18.625. HPH type shafts, severe duty features, explosion proof, and other modifications such as adding screens are also available through special order--contact Marathon Electric for more information. Features: Normal thrust Class F insulation 1.15 Service Factor Suitable for 230 volt part winding start through 100 HP Heavy duty lifting lugs Drip cover/canopy cap included UL Recognized and CSA Certified "Quick Details: Brand Name: Place of Origin:USA Specifications Catalog Number:E581 Manufacturer:Marathon Enclosure:Explosion Proof Frame:444TS Hertz:60 HP:125 Mounting:Rigid Base Phase:3 Voltage:460 Explosion Proof, Three Phase Blue Chip XRI® NEMA Premium® Severe Duty Class I Group C & D, Class II Groups F & G, Rigid Base Applications: For use on fans, blowers, pumps, compressors, machine tools, and other equipment installed in hazardous environments as defined by the motor’s explosion proof class and group rating. Consult the National Electrical Code and your local regulations for the proper selection of motors in hazardous conditions. Features: Meets NEMA Premium® efficiencies 10:1 Variable torque, see Inverter Duty column for constant torque MAX GUARD® Class F insulation 1.15 Service Factor on sinewave or 1.0 Service Factor on IBGT power Normally closed thermostats (must be connected to control circuit) Meets UL frame temperature limit code T3B All cast iron construction Shaft slinger Internal and external surfaces treated with epoxy paint Extended grease tubes Nameplated 60/50 Hz, 190/380 Volts, at next lower HP where Quick Details:" Brand Name: Place of Origin:USA Specifications Catalog Number: Manufacturer: Enclosure: Frame: Hertz: HP: Mounting: Phase: Voltage: Vertical Solid Shaft P-Base Totally Enclosed Applications: For use on: Vertical end suction, short couple, centrifugal, non-clog, mix flow, turbine, and propeller pumps. Totally Enclosed, Fan Cooled construction restricts the free exchange of ambient air inside the motor. Suitable for demanding applications in the process industries. HP type shafts, per NEMA MG-1, 18.625. HPH type shafts, severe duty features, explosion proof, and other modifications such as adding screens are also available through special order--contact Marathon Electric for more information. Features: Normal thrust Class F insulation 1.15 Service Factor Suitable for 230 volt part winding start through 100 HP Heavy duty lifting lugs Drip cover/canopy cap included UL Recognized and CSA Certified "Quick Details: Brand Name: Place of Origin:USA Specifications Catalog Number:M889 Manufacturer:MARATHON Enclosure:Totally Enclosed Frame:254HP Hertz:60 HP:15 Mounting:P-Base Phase:3 Voltage:230/460 Vertical Solid Shaft P-Base Totally Enclosed Applications: For use on: Vertical end suction, short couple, centrifugal, non-clog, mix flow, turbine, and propeller pumps. Totally Enclosed, Fan Cooled construction restricts the free exchange of ambient air inside the motor. Suitable for demanding applications in the process industries. HP type shafts, per NEMA MG-1, 18.625. HPH type shafts, severe duty features, explosion proof, and other modifications such as adding screens are also available through special order--contact Marathon Electric for more information. Features: Normal thrust Class F insulation 1.15 Service Factor Suitable for 230 volt part winding start through 100 HP Heavy duty lifting lugs Drip cover/canopy cap included UL Recognized and CSA Certified Quick Details:" Brand Name: Place of Origin:USA Specifications Catalog Number: Manufacturer: Enclosure: Frame: Hertz: HP: Mounting: Phase: Voltage: Vertical Solid Shaft P-Base Totally Enclosed Applications: For use on: Vertical end suction, short couple, centrifugal, non-clog, mix flow, turbine, and propeller pumps. Totally Enclosed, Fan Cooled construction restricts the free exchange of ambient air inside the motor. Suitable for demanding applications in the process industries. HP type shafts, per NEMA MG-1, 18.625. HPH type shafts, severe duty features, explosion proof, and other modifications such as adding screens are also available through special order--contact Marathon Electric for more information. Features: Normal thrust Class F insulation 1.15 Service Factor Suitable for 230 volt part winding start through 100 HP Heavy duty lifting lugs Drip cover/canopy cap included UL Recognized and CSA Certified "Quick Details: Brand Name: Place of Origin:USA Specifications Catalog Number:E189 Manufacturer:Marathon Enclosure:Dripproof Frame:254JMV Hertz:60 HP:15 Mounting:C-Face with Rigid Base Phase:3 Voltage:575 575 Volt: JM Close-Coupled Pump, Three Phase Dripproof, C-Face and C-Face with Rigid Base Applications: Close-coupled pumps where the pump impeller is mounted directly on the motor shaft in environments that are relatively clean and dry. For use outdoors an enclosure or drip cover may be required (see Accessories section). Features: NEMA JM pump shaft dimensions JMV frame includes drip cover for vertical mount without base JM frame has rigid base, drip cover not included Ball bearings, mechanically locked on shaft end Continuous duty 1.15 Service Factor UL Recognized and CSA Certified UL Listed for Fire Pump applications Quick Details:" Brand Name: Place of Origin:USA Specifications Catalog Number: Manufacturer: Enclosure: Frame: Hertz: HP: Mounting: Phase: Voltage: 575 Volt: Premium Severe Duty/Chemical Processing/IEEE-841, Three Phase, NEMA Premium® Efficiency, Blue Chip XRI® Totally Enclosed, Rigid Base Applications: For extreme applications in the process industries such as chemical plants, paper mills, refineries, mines, food processing, foundries, and other severe duty environments where long life and ultra-high efficiency are desired. Guaranteed efficiencies offer an eXtra Return on your Investment when using these premium efficiency motors on high cycle or long run time applications. Features: Meets or exceeds NEMA Premium® efficiencies, except where noted Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration Provisions to add stub shaft for an encoder Internal and external epoxy paint MAX GUARD® Class F insulation system 1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT Power Extended grease tubes, regreasable in service Brass drain and breather Meets IEEE45, USCG Marine Duty, IP54 Construction Meets Ford EMS Automotive Specification Division 2 CSA certification nameplate, for hazardous locations, Class 1 Groups A, B, C, and D Actual test and vibration data supplied with each motor Ball bearings, except where noted UL Recognized (through 449T), CSA Certified Three year warranty Available with Nameplate Modification (through 40 HP): 2:1, 20:1, or 1000:1 Constant Torque,1.0 Service Factor on IGBT (PWM) power 1.25 Service Factor through 40 HP (sinewave only) 50 HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only) Contact Marathon Electric for optional nameplate markings on 50 HP and larger "Quick Details: Brand Name: Place of Origin:USA Specifications Catalog Number:E586 Manufacturer:Marathon Enclosure:Explosion Proof Frame:445T Hertz:60 HP:150 Mounting:Rigid Base Phase:3 Voltage:460 Explosion Proof, Three Phase Blue Chip XRI® NEMA Premium® Severe Duty Class I Group C & D, Class II Groups F & G, Rigid Base Applications: For use on fans, blowers, pumps, compressors, machine tools, and other equipment installed in hazardous environments as defined by the motor’s explosion proof class and group rating. Consult the National Electrical Code and your local regulations for the proper selection of motors in hazardous conditions. Features: Meets NEMA Premium® efficiencies 10:1 Variable torque, see Inverter Duty column for constant torque MAX GUARD® Class F insulation 1.15 Service Factor on sinewave or 1.0 Service Factor on IBGT power Normally closed thermostats (must be connected to control circuit) Meets UL frame temperature limit code T3B All cast iron construction Shaft slinger Internal and external surfaces treated with epoxy paint Extended grease tubes Nameplated 60/50 Hz, 190/380 Volts, at next lower HP Quick Details:" Brand Name: Place of Origin:USA Specifications Catalog Number: Manufacturer: Enclosure: Frame: Hertz: HP: Mounting: Phase: Voltage: Explosion Proof, Three Phase Blue Chip XRI® NEMA Premium® Severe Duty Class I Group C & D, Class II Groups F & G, Rigid Base Applications: For use on fans, blowers, pumps, compressors, machine tools, and other equipment installed in hazardous environments as defined by the motor’s explosion proof class and group rating. Consult the National Electrical Code and your local regulations for the proper selection of motors in hazardous conditions. Features: Meets NEMA Premium® efficiencies 10:1 Variable torque, see Inverter Duty column for constant torque MAX GUARD® Class F insulation 1.15 Service Factor on sinewave or 1.0 Service Factor on IBGT power Normally closed thermostats (must be connected to control circuit) Meets UL frame temperature limit code T3B All cast iron construction Shaft slinger Internal and external surfaces treated with epoxy paint Extended grease tubes Nameplated 60/50 Hz, 190/380 Volts, at next lower HP where "Quick Details: Brand Name: Place of Origin:USA Specifications Catalog Number:Z423 Manufacturer:MARATHON Enclosure:Dripproof Frame:145JP Hertz:60 HP:2 Mounting:C-Face with Rigid Base Phase:1 Voltage:115/208-230 JP Close-Coupled Pump, Single Phase Dripproof, C-Face with Rigid Base Applications: Close-coupled pumps where the pump impeller is mounted directly on the motor shaft in environments that are relatively clean and dry. Features: NEMA JP pump shaft dimensions Ball bearings, mechanically locked on shaft end Capacitor start design Continuous duty 1.15 Service Factor UL Recognized and CSA Certified Quick Details:" Brand Name: Place of Origin:USA Specifications Catalog Number: Manufacturer: Enclosure: Frame: Hertz: HP: Mounting: Phase: Voltage: JP Close-Coupled Pump, Three Phase Dripproof, C-Face/Vertical and C-Face with Rigid Base Applications: Close-coupled pumps where the pump impeller is mounted directly on the motor shaft in environments that are relatively clean and dry. Features: NEMA JP pump shaft dimensions JPV frame includes drip cover for vertical mount without base JP frame has rigid base, drip cover not included Ball bearings, mechanically locked on shaft end Continuous duty 1.15 Service Factor UL Recognized and CSA Certified UL Listed for Fire Pump applications except where footnoted "Quick Details: Brand Name: Place of Origin:USA Specifications Catalog Number:W516 Manufacturer:Marathon Enclosure:Totally Enclosed Frame:213T Hertz:60 HP:2 Mounting:Rigid Base Phase:3 Voltage:460 Premium Severe Duty/Chemical Processing/IEEE-841, Three Phase, NEMA Premium® Efficiency, Blue Chip XRI® Totally Enclosed, Rigid Base Applications: For extreme applications in the process industries such as chemical plants, pulp and paper mills, refineries, above-ground mines, food processing, foundries, and other severe duty environments where long life and ultra-high efficiency are required. Guaranteed efficiencies offer an eXtra Return on your Investment when using these premium efficiency motors on high cycle or long run time applications. Features: Meets or exceeds NEMA Premium® efficiencies Meets IEEE-841 standard for severe duty applications Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration Inpro/Seal® VBX® bearing isolators on drive end shaft extension TENV and on both ends of TEFC Provisions to add stub shaft for an encoder (182T-449T, TEFC only) Internal and external epoxy paint MAX GUARD® Class F insulation system 1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power Bearing caps (254T and larger) Precision balanced Extended grease tubes, regreasable in service Brass drain and breather Meets IEEE45 USCG Marine Duty, API RPI4F for offshore platforms, IP56 Meets NEMA MG1 - 1.26.6 Waterproof specification Division 2 CSA certification nameplate, for hazardous locations, Class I Groups A, B, C, and D Actual test and vibration data supplied with each motor Ball bearings, except where noted UL Recognized (through 44 Available with Nameplate Modification (through 40 HP): 2:1, 20:1, or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power 1.25 Service Factor through 40 HP (sinewave only) 50HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only) Contact Marathon Electric for optional nameplate markings on 50 HP and larger: Quick Details:" Brand Name: Place of Origin:USA Specifications Catalog Number: Manufacturer: Enclosure: Frame: Hertz: HP: Mounting: Phase: Voltage: 575 Volt: General Purpose, Three Phase Dripproof, Rigid Base Applications: General purpose use on compressors, pumps, conveyors, fans, blowers, and other machinery in environments that are relatively clean and dry where 575 volt three phase power is readily available. Features: Ball bearings NEMA Service Factors UL Recognized and CSA Certified "Quick Details: Brand Name: Place of Origin:USA Specifications Catalog Number:M169 Manufacturer:MARATHON Enclosure:Dripproof Frame:254JPV Hertz:60 HP:20 Mounting:C-Face/Vertical and C-Face with Rigid Base Phase:3 Voltage:208-230/460 JP Close-Coupled Pump, Three Phase Dripproof, C-Face/Vertical and C-Face with Rigid Base Applications: Close-coupled pumps where the pump impeller is mounted directly on the motor shaft in environments that are relatively clean and dry. Features: NEMA JP pump shaft dimensions JPV frame includes drip cover for vertical mount without base JP frame has rigid base, drip cover not included Ball bearings, mechanically locked on shaft end Continuous duty 1.15 Service Factor UL Recognized and CSA Certified UL Listed for Fire Pump applications except where footnoted Quick Details:" Brand Name: Place of Origin:USA Specifications Catalog Number: Manufacturer: Enclosure: Frame: Hertz: HP: Mounting: Phase: Voltage: Explosion Proof, Three Phase Blue Chip XRI® NEMA Premium® Severe Duty Class I Group C & D, Class II Groups F & G, Rigid Base Applications: For use on fans, blowers, pumps, compressors, machine tools, and other equipment installed in hazardous environments as defined by the motor’s explosion proof class and group rating. Consult the National Electrical Code and your local regulations for the proper selection of motors in hazardous conditions. Features: Meets NEMA Premium® efficiencies 10:1 Variable torque, see Inverter Duty column for constant torque MAX GUARD® Class F insulation 1.15 Service Factor on sinewave or 1.0 Service Factor on IBGT power Normally closed thermostats (must be connected to control circuit) Meets UL frame temperature limit code T3B All cast iron construction Shaft slinger Internal and external surfaces treated with epoxy paint Extended grease tubes Nameplated 60/50 Hz, 190/380 Volts, at next lower HP where "Quick Details: Brand Name: Place of Origin:USA Specifications Catalog Number:U222 Manufacturer:MARATHON Enclosure:Dripproof Frame:256JPV Hertz:60 HP:20 Mounting:C-Face/Vertical and C-Face with Rigid Base Phase:3 Voltage:230/460 JP Close-Coupled Pump, Three Phase Dripproof, C-Face/Vertical and C-Face with Rigid Base Applications: Close-coupled pumps where the pump impeller is mounted directly on the motor shaft in environments that are relatively clean and dry. Features: NEMA JP pump shaft dimensions JPV frame includes drip cover for vertical mount without base JP frame has rigid base, drip cover not included Ball bearings, mechanically locked on shaft end Continuous duty 1.15 Service Factor UL Recognized and CSA Certified UL Listed for Fire Pump applications except where footnoted Quick Details:" Brand Name: Place of Origin:USA Specifications Catalog Number: Manufacturer: Enclosure: Frame: Hertz: HP: Mounting: Phase: Voltage: Vertical Solid Shaft P-Base Dripproof Applications: For use on: Vertical end suction, short couple, centrifugal, non-clog, mix flow, turbine, and propeller pumps. HP type shafts, per NEMA MG-1 18.625. HPH and TCV type shafts, single phase, wound rotor designs, and other modifications such as adding screens are also available through special order--contact Marathon Electric for more information. Features: Normal thrust Ball bearings Class B insulation 1.15 Service Factor Suitable for 230 volt part winding start through 100 HP Heavy duty lifting lugs Drip cover/canopy cap included UL Recognized and CSA Certified "Quick Details: Brand Name: Place of Origin:USA Specifications Catalog Number:M895 Manufacturer:MARATHON Enclosure:Totally Enclosed Frame:324HP Hertz:60 HP:20 Mounting:P-Base Phase:3 Voltage:230/460 Vertical Solid Shaft P-Base Totally Enclosed Applications: For use on: Vertical end suction, short couple, centrifugal, non-clog, mix flow, turbine, and propeller pumps. Totally Enclosed, Fan Cooled construction restricts the free exchange of ambient air inside the motor. Suitable for demanding applications in the process industries. HP type shafts, per NEMA MG-1, 18.625. HPH type shafts, severe duty features, explosion proof, and other modifications such as adding screens are also available through special order--contact Marathon Electric for more information. Features: Normal thrust Class F insulation 1.15 Service Factor Suitable for 230 volt part winding start through 100 HP Heavy duty lifting lugs Drip cover/canopy cap included UL Recognized and CSA Certified Quick Details:" Brand Name: Place of Origin:USA Specifications Catalog Number: Manufacturer: Enclosure: Frame: Hertz: HP: Mounting: Phase: Voltage: Premium Severe Duty/Chemical Processing/IEEE-841, Three Phase, NEMA Premium® Efficiency, Blue Chip XRI® Totally Enclosed, Rigid Base Applications: For extreme applications in the process industries such as chemical plants, pulp and paper mills, refineries, above-ground mines, food processing, foundries, and other severe duty environments where long life and ultra-high efficiency are required. Guaranteed efficiencies offer an eXtra Return on your Investment when using these premium efficiency motors on high cycle or long run time applications. Features: Meets or exceeds NEMA Premium® efficiencies Meets IEEE-841 standard for severe duty applications Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration Inpro/Seal® VBX® bearing isolators on drive end shaft extension TENV and on both ends of TEFC Provisions to add stub shaft for an encoder (182T-449T, TEFC only) Internal and external epoxy paint MAX GUARD® Class F insulation system 1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power Bearing caps (254T and larger) Precision balanced Extended grease tubes, regreasable in service Brass drain and breather Meets IEEE45 USCG Marine Duty, API RPI4F for offshore platforms, IP56 Meets NEMA MG1 - 1.26.6 Waterproof specification Division 2 CSA certification nameplate, for hazardous locations, Class I Groups A, B, C, and D Actual test and vibration data supplied with each motor Ball bearings, except where noted UL Recognized (through 44 Available with Nameplate Modification (through 40 HP): 2:1, 20:1, or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power 1.25 Service Factor through 40 HP (sinewave only) 50HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only) Contact Marathon Electric for optional nameplate markings on 50 HP and larger "Quick Details: Brand Name: Place of Origin:USA Specifications Catalog Number:W552 Manufacturer:Marathon Enclosure:Totally Enclosed Frame:256T Hertz:60 HP:20 Mounting:Rigid Base Phase:3 Voltage:575 Premium Severe Duty/Chemical Processing/IEEE-841, Three Phase, NEMA Premium® Efficiency, Blue Chip XRI® Totally Enclosed, Rigid Base Applications: For extreme applications in the process industries such as chemical plants, pulp and paper mills, refineries, above-ground mines, food processing, foundries, and other severe duty environments where long life and ultra-high efficiency are required. Guaranteed efficiencies offer an eXtra Return on your Investment when using these premium efficiency motors on high cycle or long run time applications. Features: Meets or exceeds NEMA Premium® efficiencies Meets IEEE-841 standard for severe duty applications Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration Inpro/Seal® VBX® bearing isolators on drive end shaft extension TENV and on both ends of TEFC Provisions to add stub shaft for an encoder (182T-449T, TEFC only) Internal and external epoxy paint MAX GUARD® Class F insulation system 1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power Bearing caps (254T and larger) Precision balanced Extended grease tubes, regreasable in service Brass drain and breather Meets IEEE45 USCG Marine Duty, API RPI4F for offshore platforms, IP56 Meets NEMA MG1 - 1.26.6 Waterproof specification Division 2 CSA certification nameplate, for hazardous locations, Class I Groups A, B, C, and D Actual test and vibration data supplied with each motor Ball bearings, except where noted UL Recognized (through 44 Available with Nameplate Modification (through 40 HP): 2:1, 20:1, or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power 1.25 Service Factor through 40 HP (sinewave only) 50HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only) Contact Marathon Electric for optional nameplate markings on 50 HP and larger Quick Details:" Brand Name: Place of Origin:USA Specifications Catalog Number: Manufacturer: Enclosure: Frame: Hertz: HP: Mounting: Phase: Blue Chip® quality, cast iron construction for rigidity and reduced vibration Open Conrad radial ball bearings rated at 100,000 hour B-10 life on direct coupled-loads except where footnoted Grease fittings with extended grease tubes Oversized cast iron conduit box Epoxy, 100% solids, Vacuum Pressure Impregnation (VPI) resin 1.15 Service Factor (except where footnoted) Front and rear cast iron bearing caps Provisions for jacking bolts in all four feet Actual test and vibration data included with each motor. Class F insulation. Form wound coils Internal and external epoxy finish Rotating shaft seals, Inpro® Smart Rings on each end Provisions for dowel pins in drive end feet Ground provisions on foot and in the conduit box Frames drilled with four sets of footholes, 5009, 5010, 5011 and 5012 as standard except where footnoted Division 2 CSA certified for Class 1, Group A, B, C, D, temperature Code T2C @ 1.0 Service Factor Division 2 CSA certified for Class 1, Group A, B, C, D, temperature Code T2B @ 1.15 Service Factor IEEE-841 features available contact customer service for details "Quick Details: Brand Name: Place of Origin:USA Specifications Catalog Number:E589 Manufacturer:Marathon Enclosure:Explosion Proof Frame:449T Hertz:60 HP:200 Mounting:Rigid Base Phase:3 Voltage:460 Explosion Proof, Three Phase Blue Chip XRI® NEMA Premium® Severe Duty Class I Group C & D, Class II Groups F & G, Rigid Base Applications: For use on fans, blowers, pumps, compressors, machine tools, and other equipment installed in hazardous environments as defined by the motor’s explosion proof class and group rating. Consult the National Electrical Code and your local regulations for the proper selection of motors in hazardous conditions. Features: Meets NEMA Premium® efficiencies 10:1 Variable torque, see Inverter Duty column for constant torque MAX GUARD® Class F insulation 1.15 Service Factor on sinewave or 1.0 Service Factor on IBGT power Normally closed thermostats (must be connected to control circuit) Meets UL frame temperature limit code T3B All cast iron construction Shaft slinger Internal and external surfaces treated with epoxy paint Extended grease tubes Nameplated 60/50 Hz, 190/380 Volts, at next lower HP where Quick Details:" Brand Name: Place of Origin:USA Specifications Catalog Number: Manufacturer: Enclosure: Frame: Hertz: HP: Mounting: Phase: Voltage: Premium Severe Duty/Chemical Processing/IEEE-841, Three Phase, NEMA Premium® Efficiency, Blue Chip XRI® Totally Enclosed, Rigid Base Applications: For extreme applications in the process industries such as chemical plants, pulp and paper mills, refineries, above-ground mines, food processing, foundries, and other severe duty environments where long life and ultra-high efficiency are required. Guaranteed efficiencies offer an eXtra Return on your Investment when using these premium efficiency motors on high cycle or long run time applications. Features: Meets or exceeds NEMA Premium® efficiencies Meets IEEE-841 standard for severe duty applications Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration Inpro/Seal® VBX® bearing isolators on drive end shaft extension TENV and on both ends of TEFC Provisions to add stub shaft for an encoder (182T-449T, TEFC only) Internal and external epoxy paint MAX GUARD® Class F insulation system 1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power Bearing caps (254T and larger) Precision balanced Extended grease tubes, regreasable in service Brass drain and breather Meets IEEE45 USCG Marine Duty, API RPI4F for offshore platforms, IP56 Meets NEMA MG1 - 1.26.6 Waterproof specification Division 2 CSA certification nameplate, for hazardous locations, Class I Groups A, B, C, and D Actual test and vibration data supplied with each motor Ball bearings, except where noted UL Recognized (through 44 Available with Nameplate Modification (through 40 HP): 2:1, 20:1, or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power 1.25 Service Factor through 40 HP (sinewave only) 50HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only) Contact Marathon Electric for optional nameplate markings on 50 HP and larger "Quick Details: Brand Name: Place of Origin:USA Specifications Catalog Number:E587 Manufacturer:Marathon Enclosure:Explosion Proof Frame:445TS Hertz:60 HP:200 Mounting:Rigid Base Phase:3 Voltage:460 Explosion Proof, Three Phase Blue Chip XRI® NEMA Premium® Severe Duty Class I Group C & D, Class II Groups F & G, Rigid Base Applications: For use on fans, blowers, pumps, compressors, machine tools, and other equipment installed in hazardous environments as defined by the motor’s explosion proof class and group rating. Consult the National Electrical Code and your local regulations for the proper selection of motors in hazardous conditions. Features: Meets NEMA Premium® efficiencies 10:1 Variable torque, see Inverter Duty column for constant torque MAX GUARD® Class F insulation 1.15 Service Factor on sinewave or 1.0 Service Factor on IBGT power Normally closed thermostats (must be connected to control circuit) Meets UL frame temperature limit code T3B All cast iron construction Shaft slinger Internal and external surfaces treated with epoxy paint Extended grease tubes Nameplated 60/50 Hz, 190/380 Volts, at next lower HP where Quick Details:" Brand Name: Place of Origin:USA Specifications Catalog Number: Manufacturer: Enclosure: Frame: Hertz: HP: Mounting: Phase: Voltage: Explosion Proof, Three Phase Blue Chip XRI® NEMA Premium® Severe Duty Class I Group C & D, Class II Groups F & G, Rigid Base Applications: For use on fans, blowers, pumps, compressors, machine tools, and other equipment installed in hazardous environments as defined by the motor’s explosion proof class and group rating. Consult the National Electrical Code and your local regulations for the proper selection of motors in hazardous conditions. Features: Meets NEMA Premium® efficiencies 10:1 Variable torque, see Inverter Duty column for constant torque MAX GUARD® Class F insulation 1.15 Service Factor on sinewave or 1.0 Service Factor on IBGT power Normally closed thermostats (must be connected to control circuit) Meets UL frame temperature limit code T3B All cast iron construction Shaft slinger Internal and external surfaces treated with epoxy paint Extended grease tubes Nameplated 60/50 Hz, 190/380 Volts, at next lower HP "Quick Details: Brand Name: Place of Origin:USA Specifications Catalog Number:W564 Manufacturer:Marathon Enclosure:Totally Enclosed Frame:326T Hertz:60 HP:25 Mounting:Rigid Base Phase:3 Voltage:460 Premium Severe Duty/Chemical Processing/IEEE-841, Three Phase, NEMA Premium® Efficiency, Blue Chip XRI® Totally Enclosed, Rigid Base Applications: For extreme applications in the process industries such as chemical plants, pulp and paper mills, refineries, above-ground mines, food processing, foundries, and other severe duty environments where long life and ultra-high efficiency are required. Guaranteed efficiencies offer an eXtra Return on your Investment when using these premium efficiency motors on high cycle or long run time applications. Features: Meets or exceeds NEMA Premium® efficiencies Meets IEEE-841 standard for severe duty applications Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration Inpro/Seal® VBX® bearing isolators on drive end shaft extension TENV and on both ends of TEFC Provisions to add stub shaft for an encoder (182T-449T, TEFC only) Internal and external epoxy paint MAX GUARD® Class F insulation system 1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power Bearing caps (254T and larger) Precision balanced Extended grease tubes, regreasable in service Brass drain and breather Meets IEEE45 USCG Marine Duty, API RPI4F for offshore platforms, IP56 Meets NEMA MG1 - 1.26.6 Waterproof specification Division 2 CSA certification nameplate, for hazardous locations, Class I Groups A, B, C, and D Actual test and vibration data supplied with each motor Ball bearings, except where noted UL Recognized (through 44 Available with Nameplate Modification (through 40 HP): 2:1, 20:1, or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power 1.25 Service Factor through 40 HP (sinewave only) 50HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only) Contact Marathon Electric for optional nameplate markings on 50 HP and larger Quick Details:" Brand Name: Place of Origin:USA Specifications Catalog Number: Manufacturer: Enclosure: Frame: Hertz: HP: Mounting: Phase: Voltage: Premium Severe Duty/Chemical Processing/IEEE-841, Three Phase, NEMA Premium® Efficiency, Blue Chip XRI® Totally Enclosed, Rigid Base Applications: For extreme applications in the process industries such as chemical plants, pulp and paper mills, refineries, above-ground mines, food processing, foundries, and other severe duty environments where long life and ultra-high efficiency are required. Guaranteed efficiencies offer an eXtra Return on your Investment when using these premium efficiency motors on high cycle or long run time applications. Features: Meets or exceeds NEMA Premium® efficiencies Meets IEEE-841 standard for severe duty applications Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration Inpro/Seal® VBX® bearing isolators on drive end shaft extension TENV and on both ends of TEFC Provisions to add stub shaft for an encoder (182T-449T, TEFC only) Internal and external epoxy paint MAX GUARD® Class F insulation system 1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power Bearing caps (254T and larger) Precision balanced Extended grease tubes, regreasable in service Brass drain and breather Meets IEEE45 USCG Marine Duty, API RPI4F for offshore platforms, IP56 Meets NEMA MG1 - 1.26.6 Waterproof specification Division 2 CSA certification nameplate, for hazardous locations, Class I Groups A, B, C, and D Actual test and vibration data supplied with each motor Ball bearings, except where noted UL Recognized (through 44 Available with Nameplate Modification (through 40 HP): 2:1, 20:1, or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power 1.25 Service Factor through 40 HP (sinewave only) 50HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only) Contact Marathon Electric for optional nameplate markings on 50 HP and larger "Quick Details: Brand Name: Place of Origin:USA Specifications Catalog Number:Y258 Manufacturer:MARATHON Enclosure:Totally Enclosed Frame:5011S Hertz:60 HP:250 Mounting:Rigid Base Phase:3 Applications: For extreme applications in the process industries such as chemical plants, pulp and paper mills,food processing,foundries,and other severe duty nvironments where medium voltage power is available. Features: Blue Chip® quality, cast iron construction for rigidity and reduced vibration Open Conrad radial ball bearings rated at 100,000 hour B-10 life on direct coupled-loads except where footnoted Grease fittings with extended grease tubes Oversized cast iron conduit box Epoxy, 100% solids, Vacuum Pressure Impregnation (VPI) resin 1.15 Service Factor (except where footnoted) Front and rear cast iron bearing caps Provisions for jacking bolts in all four feet Actual test and vibration data included with each motor Class F insulation. Form wound coils Internal and external epoxy finish Rotating shaft seals, Inpro® Smart Rings on each end Provisions for dowel pins in drive end feet Ground provisions on foot and in the conduit box Frames drilled with four sets of footholes, 5009, 5010, 5011 and 5012 as standard except where footnoted Division 2 CSA certified for Class 1, Group A, B, C, D, temperature Code T2C @ 1.0 Service Factor Division 2 CSA certified for Class 1, Group A, B, C, D, temperature Code T2B @ 1.15 Service Factor IEEE-841 features available contact customer service for details Quick Details:" Brand Name: Place of Origin:USA Specifications Catalog Number: Manufacturer: Enclosure: Frame: Hertz: HP: Mounting: Phase: Features: Blue Chip® quality, cast iron construction for rigidity and reduced vibration Open Conrad radial ball bearings rated at 100,000 hour B-10 life on direct coupled-loads except where footnoted Grease fittings with extended grease tubes Oversized cast iron conduit box Epoxy, 100% solids, Vacuum Pressure Impregnation (VPI) resin 1.15 Service Factor (except where footnoted) Front and rear cast iron bearing caps Provisions for jacking bolts in all four feet Actual test and vibration data included with each motor Class F insulation. Form wound coils Internal and external epoxy finish Rotating shaft seals, Inpro® Smart Rings on each end Provisions for dowel pins in drive end feet Ground provisions on foot and in the conduit box Frames drilled with four sets of footholes, 5009, 5010, 5011 and 5012 as standard except where footnoted Division 2 CSA certified for Class 1, Group A, B, C, D, temperature Code T2C @ 1.0 Service Factor Division 2 CSA certified for Class 1, Group A, B, C, D, temperature Code T2B @ 1.15 Service Factor IEEE-841 features available contact customer service for details "Quick Details: Brand Name: Place of Origin:USA Specifications Catalog Number:W629 Manufacturer:Marathon Enclosure:Totally Enclosed Frame:447/9T Hertz:60 HP:250 Mounting:Rigid Base Phase:3 Voltage:460 Premium Severe Duty/Chemical Processing/IEEE-841, Three Phase, NEMA Premium® Efficiency, Blue Chip XRI® Totally Enclosed, Rigid Base Applications: For extreme applications in the process industries such as chemical plants, pulp and paper mills, refineries, above-ground mines, food processing, foundries, and other severe duty environments where long life and ultra-high efficiency are required. Guaranteed efficiencies offer an eXtra Return on your Investment when using these premium efficiency motors on high cycle or long run time applications. Features: Meets or exceeds NEMA Premium® efficiencies Meets IEEE-841 standard for severe duty applications Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration Inpro/Seal® VBX® bearing isolators on drive end shaft extension TENV and on both ends of TEFC Provisions to add stub shaft for an encoder (182T-449T, TEFC only) Internal and external epoxy paint MAX GUARD® Class F insulation system 1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power Bearing caps (254T and larger) Precision balanced Extended grease tubes, regreasable in service Brass drain and breather Meets IEEE45 USCG Marine Duty, API RPI4F for offshore platforms, IP56 Meets NEMA MG1 - 1.26.6 Waterproof specification Division 2 CSA certification nameplate, for hazardous locations, Class I Groups A, B, C, and D Actual test and vibration data supplied with each motor Ball bearings, except where noted UL Recognized (through 44 Available with Nameplate Modification (through 40 HP): 2:1, 20:1, or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power 1.25 Service Factor through 40 HP (sinewave only) 50HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only) Contact Marathon Electric for optional nameplate markings on 50 HP and larger Quick Details:" Brand Name: Place of Origin:USA Specifications Catalog Number: Manufacturer: Enclosure: Frame: Hertz: HP: Mounting: Phase: Voltage: Vertical Solid Shaft P-Base Totally Enclosed Applications: For use on: Vertical end suction, short couple, centrifugal, non-clog, mix flow, turbine, and propeller pumps. Totally Enclosed, Fan Cooled construction restricts the free exchange of ambient air inside the motor. Suitable for demanding applications in the process industries. HP type shafts, per NEMA MG-1, 18.625. HPH type shafts, severe duty features, explosion proof, and other modifications such as adding screens are also available through special order--contact Marathon Electric for more information. Features: Normal thrust Class F insulation 1.15 Service Factor Suitable for 230 volt part winding start through 100 HP Heavy duty lifting lugs Drip cover/canopy cap included UL Recognized and CSA Certified "Quick Details: Brand Name: Place of Origin:USA Specifications Catalog Number:E344 Manufacturer:Marathon Enclosure:Totally Enclosed Frame:447/9T Hertz:60 HP:250 Mounting:Rigid Base Phase:3 Voltage:575 575 Volt: Premium Severe Duty/Chemical Processing Three Phase, NEMA Premium® Efficiency, Blue Chip XRI® Totally Enclosed, Rigid Base Applications: Chemical plants, paper mills, refineries, mines, food processing, foundries, and other severe duty environments where long life and ultra-high efficiency are desired. Guaranteed efficiencies offer an eXtra Return on your Investment when using these premium efficiency motors on high cycle or long run applications. Features: Meets or exceeds NEMA Premium® efficiencies, except where noted Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration Provisions to add stub shaft for an encoder (182T-449T, TEFC only) Internal and external epoxy paint MAX GUARD® Class F insulation system 1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power Bearing caps (254 + larger) Precision balanced Extended grease tubes, regreasable in service Brass drain and breather Meets IEEE45 USCG Marine Duty, IP54 Construction Division 2 CSA certification nameplate, for hazardous locations, Class I Groups A, B, C, and D Actual test and vibration data supplied with each motor Ball Bearings, except where noted UL Recognized (through 449T) and CSA Certified Three year warranty Available with Nameplate Modification: 2:1, 20:1 or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power 1.25 Service Factor through 40 HP (sinewave only) 50 HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only) Contact Marathon Electric for optional nameplate markings on 50 HP and larger Quick Details:" Brand Name: Place of Origin:USA Specifications Catalog Number: Manufacturer: Enclosure: Frame: Hertz: HP: Mounting: Phase: Voltage: Premium Severe Duty/Chemical Processing/IEEE-841, Three Phase, NEMA Premium® Efficiency, Blue Chip XRI® Totally Enclosed, Rigid Base Applications: For extreme applications in the process industries such as chemical plants, pulp and paper mills, refineries, above-ground mines, food processing, foundries, and other severe duty environments where long life and ultra-high efficiency are required. Guaranteed efficiencies offer an eXtra Return on your Investment when using these premium efficiency motors on high cycle or long run time applications. Features: Meets or exceeds NEMA Premium® efficiencies Meets IEEE-841 standard for severe duty applications Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration Inpro/Seal® VBX® bearing isolators on drive end shaft extension TENV and on both ends of TEFC Provisions to add stub shaft for an encoder (182T-449T, TEFC only) Internal and external epoxy paint MAX GUARD® Class F insulation system 1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power Bearing caps (254T and larger) Precision balanced Extended grease tubes, regreasable in service Brass drain and breather Meets IEEE45 USCG Marine Duty, API RPI4F for offshore platforms, IP56 Meets NEMA MG1 - 1.26.6 Waterproof specification Division 2 CSA certification nameplate, for hazardous locations, Class I Groups A, B, C, and D Actual test and vibration data supplied with each motor Ball bearings, except where noted UL Recognized (through 44 Available with Nameplate Modification (through 40 HP): 2:1, 20:1, or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power 1.25 Service Factor through 40 HP (sinewave only) 50HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only) Contact Marathon Electric for optional nameplate markings on 50 HP and larger "Quick Details: Brand Name: Place of Origin:USA Specifications Catalog Number:E592 Manufacturer:Marathon Enclosure:Explosion Proof Frame:449T Hertz:60 HP:300 Mounting:Rigid Base Phase:3 Voltage:460 Explosion Proof, Three Phase Blue Chip XRI® NEMA Premium® Severe Duty Class I Group C & D, Class II Groups F & G, Rigid Base Applications: For use on fans, blowers, pumps, compressors, machine tools, and other equipment installed in hazardous environments as defined by the motor’s explosion proof class and group rating. Consult the National Electrical Code and your local regulations for the proper selection of motors in hazardous conditions. Features: Meets NEMA Premium® efficiencies 10:1 Variable torque, see Inverter Duty column for constant torque MAX GUARD® Class F insulation 1.15 Service Factor on sinewave or 1.0 Service Factor on IBGT power Normally closed thermostats (must be connected to control circuit) Meets UL frame temperature limit code T3B All cast iron construction Shaft slinger Internal and external surfaces treated with epoxy paint Extended grease tubes Nameplated 60/50 Hz, 190/380 Volts, at next lower HP where Quick Details:" Brand Name: Place of Origin:USA Specifications Catalog Number: Manufacturer: Enclosure: Frame: Hertz: HP: Mounting: Phase: Voltage: Vertical Solid Shaft P-Base Totally Enclosed Applications: For use on: Vertical end suction, short couple, centrifugal, non-clog, mix flow, turbine, and propeller pumps. Totally Enclosed, Fan Cooled construction restricts the free exchange of ambient air inside the motor. Suitable for demanding applications in the process industries. HP type shafts, per NEMA MG-1, 18.625. HPH type shafts, severe duty features, explosion proof, and other modifications such as adding screens are also available through special order--contact Marathon Electric for more information. Features: Normal thrust Class F insulation 1.15 Service Factor Suitable for 230 volt part winding start through 100 HP Heavy duty lifting lugs Drip cover/canopy cap included UL Recognized and CSA Certified "Quick Details: Brand Name: Place of Origin:USA Specifications Catalog Number:E593 Manufacturer:Marathon Enclosure:Explosion Proof Frame:449T Hertz:60 HP:350 Mounting:Rigid Base Phase:3 Voltage:460 Explosion Proof, Three Phase Blue Chip XRI® NEMA Premium® Severe Duty Class I Group C & D, Class II Groups F & G, Rigid Base Applications: For use on fans, blowers, pumps, compressors, machine tools, and other equipment installed in hazardous environments as defined by the motor’s explosion proof class and group rating. Consult the National Electrical Code and your local regulations for the proper selection of motors in hazardous conditions. Features: Meets NEMA Premium® efficiencies 10:1 Variable torque, see Inverter Duty column for constant torque MAX GUARD® Class F insulation 1.15 Service Factor on sinewave or 1.0 Service Factor on IBGT power Normally closed thermostats (must be connected to control circuit) Meets UL frame temperature limit code T3B All cast iron construction Shaft slinger Internal and external surfaces treated with epoxy paint Extended grease tubes Nameplated 60/50 Hz, 190/380 Volts, at next lower HP Quick Details:" Brand Name: Place of Origin:USA Specifications Catalog Number: Manufacturer: Enclosure: Frame: Hertz: HP: Mounting: Phase: Voltage: Premium Severe Duty/Chemical Processing, Three Phase, NEMA Premium® Efficiency, Blue Chip XRI® Totally Enclosed, Rigid Base Applications: Chemical plants, paper mills, refineries, mines, food processing, foundries, and other severe duty environments where long life and ultra-high efficiency are desired. Guaranteed efficiencies offer an eXtra Return on your Investment when using these premium efficiency motors on high cycle or long run applications. Features: Meets or exceeds NEMA Premium® efficiencies, except where noted Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration Provisions to add stub shaft for an encoder (182T-449T, TEFC only) Internal and external epoxy paint MAX GUARD® Class F insulation system 1.15 Service Factor on sinewave , 1.0 Service Factor on IGBT power Bearing caps (254T and larger) Precision balanced Extended grease tubes, regreasable in service Brass drain and breather Meets IEEE45 USCG Marine Duty, IP54 Construction Meets Ford EM1 Automotive Duty Specification Division 2 CSA certification nameplate, for hazardous locations, Class I, Groups A, B, C, and D Actual test and vibration data supplied with each motor Ball bearings, except where noted UL Recognized (through 449T) CSA Certified Three year warranty Available with Nameplate Modification (through 40 HP): 2:1, 20:1, or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power 1.25 Service Factor through 40 HP (sinewave only) 50HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only) Contact Marathon Electric for optional nameplate markings on 50 HP and larger "Quick Details: Brand Name: Place of Origin:USA Specifications Catalog Number:E777 Manufacturer:MARATHON Enclosure:Totally Enclosed Frame:447/9T Hertz:60 HP:450 Mounting:Rigid Base Phase:3 Voltage:460 Premium Severe Duty/Chemical Processing, Three Phase, NEMA Premium® Efficiency, Blue Chip XRI® Totally Enclosed, Rigid Base Applications: Chemical plants, paper mills, refineries, mines, food processing, foundries, and other severe duty environments where long life and ultra-high efficiency are desired. Guaranteed efficiencies offer an eXtra Return on your Investment when using these premium efficiency motors on high cycle or long run applications. Features: Meets or exceeds NEMA Premium® efficiencies, except where noted Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration Provisions to add stub shaft for an encoder (182T-449T, TEFC only) Internal and external epoxy paint MAX GUARD® Class F insulation system 1.15 Service Factor on sinewave , 1.0 Service Factor on IGBT power Bearing caps (254T and larger) Precision balanced Extended grease tubes, regreasable in service Brass drain and breather Meets IEEE45 USCG Marine Duty, IP54 Construction Meets Ford EM1 Automotive Duty Specification Division 2 CSA certification nameplate, for hazardous locations, Class I, Groups A, B, C, and D Actual test and vibration data supplied with each motor Ball bearings, except where noted UL Recognized (through 449T) CSA Certified Three year warranty Available with Nameplate Modification (through 40 HP): 2:1, 20:1, or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power 1.25 Service Factor through 40 HP (sinewave only) 50HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only) Contact Marathon Electric for optional nameplate markings on 50 HP and larger Quick Details:" Brand Name: Place of Origin:USA Specifications Catalog Number: Manufacturer: Enclosure: Frame: Hertz: HP: Mounting: Phase: Voltage: Premium Severe Duty/Chemical Processing, Three Phase, NEMA Premium® Efficiency, Blue Chip XRI® Totally Enclosed, Rigid Base Applications: Chemical plants, paper mills, refineries, mines, food processing, foundries, and other severe duty environments where long life and ultra-high efficiency are desired. Guaranteed efficiencies offer an eXtra Return on your Investment when using these premium efficiency motors on high cycle or long run applications. Features: Meets or exceeds NEMA Premium® efficiencies, except where noted Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration Provisions to add stub shaft for an encoder (182T-449T, TEFC only) Internal and external epoxy paint MAX GUARD® Class F insulation system 1.15 Service Factor on sinewave , 1.0 Service Factor on IGBT power Bearing caps (254T and larger) Precision balanced Extended grease tubes, regreasable in service Brass drain and breather Meets IEEE45 USCG Marine Duty, IP54 Construction Meets Ford EM1 Automotive Duty Specification Division 2 CSA certification nameplate, for hazardous locations, Class I, Groups A, B, C, and D Actual test and vibration data supplied with each motor Ball bearings, except where noted UL Recognized (through 449T) CSA Certified Three year warranty Available with Nameplate Modification (through 40 HP): 2:1, 20:1, or 1000:1 Constant Torque, 1.0 Service Factor on IGBT (PWM) power 1.25 Service Factor through 40 HP (sinewave only) 50HZ at same HP, 1.0 Service Factor through 40 HP (sinewave only) Contact Marathon Electric for optional nameplate markings on 50 HP and larger "Quick Details: Brand Name: Place of Origin:USA Specifications Catalog Number:Y933 Manufacturer:MARATHON Enclosure:Totally Enclosed Frame:5013LS Hertz:60 HP:700 Mounting:Rigid Base Phase:3 Features: Blue Chip® quality, cast iron construction for rigidity and reduced vibration Open Conrad radial ball bearings rated at 100,000 hour B-10 life on direct coupled-loads except where footnoted Grease fittings with extended grease tubes Oversized cast iron conduit box Epoxy, 100% solids, Vacuum Pressure Impregnation (VPI) resin 1.15 Service Factor (except where footnoted) Front and rear cast iron bearing caps Provisions for jacking bolts in all four feet Actual test and vibration data included with each motor Class F insulation. Form wound coils Internal and external epoxy finish Rotating shaft seals, Inpro® Smart Rings on each end Provisions for dowel pins in drive end feet Ground provisions on foot and in the conduit box Frames drilled with four sets of footholes, 5009, 5010, 5011 and 5012 as standard except where footnoted Division 2 CSA certified for Class 1, Group A, B, C, D, temperature Code T2C @ 1.0 Service Factor Division 2 CSA certified for Class 1, Group A, B, C, D, temperature Code T2B @ 1.15 Service Factor IEEE-841 features available contact customer service for details Quick Details:" Brand Name: Place of Origin:USA Specifications Catalog Number: Manufacturer: Enclosure: Frame: Hertz: HP: Model No.: Mounting: Phase: Voltage: JP Close-Coupled Pump, Single Phase Dripproof, C-Face with Rigid Base Applications: Close-coupled pumps where the pump impeller is mounted directly on the motor shaft in environments that are relatively clean and dry. Features: NEMA JP pump shaft dimensions Ball bearings, mechanically locked on shaft end Capacitor start design Continuous duty 1.15 Service Factor UL Recognized and CSA Certified "Quick Details: Brand Name: Place of Origin:USA Specifications Catalog Number:E798 Manufacturer:Marathon Enclosure:Dripproof Frame:143T Hertz:60 HP:1.5 Model No.:143TTDR4006 Mounting:Rigid Base Phase:3 Voltage:575 575 Volt: General Purpose, Three Phase Dripproof, Rigid Base Applications: General purpose use on compressors, pumps, conveyors, fans, blowers, and other machinery in environments that are relatively clean and dry where 575 volt three phase power is readily available. Features: Ball bearings NEMA Service Factors UL Recognized and CSA Certified Quick Details:" Brand Name: Place of Origin:USA Specifications Catalog Number: Manufacturer: Enclosure: Frame: Hertz: HP: Model No.: Mounting: Phase: Voltage: 575 Volt: JM Close-Coupled Pump, Three Phase Dripproof, C-Face and C-Face with Rigid Base Applications: Close-coupled pumps where the pump impeller is mounted directly on the motor shaft in environments that are relatively clean and dry. For use outdoors an enclosure or drip cover may be required (see Accessories section). Features: NEMA JM pump shaft dimensions JMV frame includes drip cover for vertical mount without base JM frame has rigid base, drip cover not included Ball bearings, mechanically locked on shaft end Continuous duty 1.15 Service Factor UL Recognized and CSA Certified UL Listed for Fire Pump applications "Quick Details: Brand Name: Place of Origin:USA Specifications Catalog Number:U124 Manufacturer:Marathon Enclosure:Dripproof Frame:143JP Hertz:60 HP:1 Model No.:143TTDR4048 Mounting:C-Face/Vertical and C-Face with Rigid Base Phase:3 Voltage:575 575 Volt: JP Close-Coupled Pump, Three Phase Dripproof, C-Face/Vertical and C-Face with Rigid Base Applications: Close-coupled pumps where the pump impeller is mounted directly on the motor shaft in environments that are relatively clean and dry. For use outdoors an enclosure or drip cover may be required (see Accessories section). Features: NEMA JP pump shaft dimensions JPV frame includes drip cover for vertical mount without base JP frame has rigid base, drip cover not included Ball bearings, mechanically locked on shaft end Continuous duty 1.15 Service Factor UL Recognized and CSA Certified UL Listed for Fire Pump applications Quick Details:" Brand Name: Place of Origin:USA Specifications Catalog Number: Manufacturer: Enclosure: Frame: Hertz: HP: Model No.: Mounting: Phase: Voltage: Premium Severe Duty/Chemical Processing, Three Phase, NEMA Premium® Efficiency, Blue Chip XRI® Totally Enclosed, Rigid Base |
| Company: | Electric Motors Dept, Chengdu AS Machinery Co.,Ltd. [ China ] |
| Contact: | Robin Hu |
| Tel: | 862865856704 |
| Fax: | 862886129221 |
| Email: | snowhu1@qq.com |
-
Disclaimer statement:The information and data included above have been realized by the enterprises and compiled by the staff, and are subject to change without notice to you. The Chemnet makes no warranties or representations whatsoever regarding the facticity, accuracy and validity of such information and data. In order to ensure your interest, we suggest you chose the products posted by our gold suppliers or VIP members.
